Master_Summer 2017_Pricing to Aug 2017

Prices Effective Until August 31 st , 2017 Summer 2017

NEW ITEMS

JUMP STARTER

MANUAL OIL EXTRACTION PUMP

• Conveniently remove oil or other liquids with no mess from spills or inconveniently accessed drain plugs. • Evacuates fluids including engine oil, transmission fluid, gear oil, coolant, and power steering fluid. • Small equipment including; lawn mower, tillers, generators, ATV’s, motorcycles, or other 4-cycle engines. • Larger equipment including; cars, trucks, boats, farm, construction and much more. • Manually operated hand pump. Includes hoses needed to fit dip stick holes, or fill ports. • 8 Liters, 2.11 Gallon Polyethylene constructed reservoir, large enough for most jobs.

• VOLTAGE-SMART SAFETY CLAMPS - Automatic shut-off prevents sparking, reverse polarity overload or battery damage • LED indicator detects if clamps are connected correctly - green means go, red means check and reconnect • Non-sparking technology provides an additional level of safety • USB port to recharge your smart phone or tablet on the go • Lithium battery provides longer shelf life • Three mode LED light: on, strobe, S.O.S. • Includes: smart clamps,

12V/120V chargers, zipper storage case

WARNING: To reduce the risk of injury and/or damage to your vehicle, do not connect the red and black clamps together. Always be sure clamps are connected to the correct terminals on the dead battery.

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W16751

600 PEAK AMP JUMP STARTER $109.95

PTS

W54171

MANUAL OIL EXTRACTION PUMP $37.95

BATTERY OPERATED TRANSFER PUMP • Easier and more convenient than your standard siphon pump. • This highly versatile battery operated pump is capable of 2.6 gallons per minute. • Pump fuel from your safety can to a generator, car, motorcycle, lawn equipment or any other fuel driven item. Works well with kerosene for heaters or stoves also. • Chemical fluids, cleaners, water (not for use with drinking water), light oil, etc

• EXPAND THE FUNCTIONALITY OF YOUR HEAT GUN WITH THESE UNIVERSLA ADAPTERS FOR HEAT GUBE WITH 1-3/8” NOZZLES USED FOR CONTROLING THE FLOW OF AIR AND FOCUSING HEAT TO THE DESIRED AREA 4 PC HEAT GUN NOZZLE KIT •

INCLUDES AIR SPREADER, REDUCER, SCRAPER AND DEFLECTOR ADAPTERS

LINE CODE

PART NO.

DESCRIPTION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W54172 BATTERY OPERATED TRANSFER PUMP $10.95

PTS

W54171

MANUAL OIL EXTRACTION PUMP $5.95

STRETCH INSTALLATION TOOL

LOCK ON GREASE COUPLER

Allows you to lock on the fitting with just a slight push, releases with the same minimal effort. Fits most grease guns and accessories.

Service belts on 2001 Current; GM, Ford, Mazda, Subaru, Dodge, and more.

W84013: LOW PROFILE PROVIDES AN EASIER ACCESS TO TIGHT SPACES.

• Positive seal prevents leakage while pumping grease up to 10,000psi. • Once locked on both hands can be used to operate the grease gun. • The small design allows you into tighter areas than other lock on couplers. LINE CODE PART NO. DESCRITPION PRICE PTS W54228 LOCK ON GREASE COUPLER $43.95

PT POWER

W84014: Made for larger pulleys with different offsets found on many European and Domestic vehicles.

FIREPOINT LED HEADLAMP

NICHIA LED NEVER NEEDS REPLACING RED REAR LED FOR SAFETY AND VISIBILITY 3 OUTPUT MODES: HIGH/ LOW/ FLASH 193 LUMENS, 1 HR 15 MINS RUN TIME, 87m BEAM INCLUDES 3-AAA BATTERIES

W84015: . Made for larger pulleys with different offsets found on many European and Domestic vehicles.

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS PTS PTS

W84013 STRETCH INSTALLATION TOOL W84014 STRETCH INSTALLATION TOOL W84015 STRETCH INSTALLATION TOOL

$9.95

LINE CODE

PART NO.

DESCRITPION

PRICE

$13.95 $15.95

PTS

W2463 FIREPOINT LED HEADLAMP

$21.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

120V PORTABLE LED WORK LIGHT

FIREPOINT 3-IN-1 UV LED FLASHLIGHT

• •

PATENTED NICHIA LED

FEATURES UV LIGHT AND LASER POINTER

LED TECHNOLOGY MEANS UNIT STAYS COOL ENOUGH TO TOUCH. WIDE ANGLES LEDS DISTRIBUTE LARGE FLOOD BEAM OF LIGHT.

UV LIGHT FOR FLUID DETECTION, ID AND DOCUMENT VERIFICATION AND MORE

• 43 LUMENS, 7.5 HR RUN TIME, 41m BEAM; INCLUDES 3-AAA BATTERIES

16” 18GA POWER CABLE.

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W2468 3-IN-1 FIREPOINT LED

$9.95

3AA LED WORK LIGHT

LINE CODE

PART NO.

DESCRITPION

PRICE

• •

Super bright LEDs never need replacing Strong magnet attaches to almost any metal surface Swivel hook adjusts to multiple angles and stores away easily Specs: 248 Lumens, 181cd Beam Intensity, 26.9m Beam Distance 3AA batteries included

PTS $31.95 FIREPOINT 419LM TACTICAL FLASHLIGHT W2401 120V PORTABLE LED WORK LIGHT

Super Bright Nichia LED never needs replacing Anodized tactical aluminum housing

• •

• • •

Water and impact resistant

Specs: 419 lumens high, 138 lumens low, half hour run time (high), 5.5hr runtime low, 250m beam, 15787cd, Includes 4AAA batteries

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W2424 3AA LED WORK LIGHT

$8.95

LINE CODE

PART NO.

DESCRITPION

PRICE

FIREPOINT LED FLASHLIGHT

PTS

W2478 FIREPOINT 419LM TACTICAL

$16.95

4 LED HEADLAMP

ADJUST PRO-FOCUS BEAM FROM SPOT TO FLOOD NICHIA LED NEVER NEEDS REPLACING WATER AND IMPACT RESISTANT

• NICHIA LED NEVER NEEDS 4 bright hite, wide angle LEDs create a large flood of light. • Comfortable and lightweight design. • Adjustable headstrap.199cd peak beam intensity • 180 LUMENS ON HIGH ; 52 LUMENS ON LOW • BEAM DISTANCE: 28.2m; RUN TIME: 5 HOUR

• 408 LUMENS, 9.5 HR RUN TIME, 250m BEAM; INCLUDES 3-C BATTERIES

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS $27.95 FIREPOINT PINK CAMO LED FLASHLIGHT W2493 3C FIREPOINT LED

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS $9.95 FIREPOINT ARCTIC CAMO LED FLASHLIGHT W2374 4 LED HEADLAMP

• •

SPECIAL EDITION

SNAP ON RED LENS FOR NIGHT VISION, BLUE FOR FLUID DETECTION 169 LUMENS, 6 HR. RUN TIME,

SPECIAL EDITION PINK CAMO

• 10% OF THE PROCEEDS DONATED TO BREAST CANCER RESEARCH • 169 LUMENS, 6 HR. RUN TIME, 76m BEAM; INCLUDES 2-AA BATTERIES

• •

76m BEAM

INCLUDE 2-AA BATTERIES

LINE CODE

PART NO.

DESCRITPION

PRICE $17.95

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W2473 2AA PINK CAMO FIREPOINT

PTS $17.95 FIREPOINT RECHARGE LED FLASHLIGHT SET W2471 2 AA ARCTIC CAMO FIREPT.

6+ 1 LED POCKET LIGHT

RECHARGEABLE LITHIUM ION BATTERY INTERCHANGEABLE SNAP LENSES; RED PRESERVES NIGHT VISION, GREEN GOOD FOR NIGHT HUNTING/ FISHING, BLUE FOR LEAK DETECTION AIRCRAFT GRADE ALUMINUM PADDED NYLON BELT POUCH 330 LUMENS, 2.5 HR. RUN TIME, 200m BEAM INCLUDES 12V AND 120V CHARGER

• • •

AREA LIGHT AND SPOTLIGHT

• POCKET CLIP WITH MAGNETIC BACK FOR HANDS FREE USE • 106 LUMENS, 5.5 HRS RUN TIME, 1m IMPACT RESISTANCE

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W2475 LI-ION FLASHLIGHT

$37.95

PTS

W2353 6+ 1 LED POCKET LIGHT

$10.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

• PRODUCES OVER 2350 LUMENS! COMPARABLE TO A 150 WATT LIGHTBULB • ADJUSTABLE DUOFOCUS BEAM GOES FROM SPOT TO FLOOD; WATER AND IMPACT RESISTANT • SUPER BRIGHT CREE LED NEVER NEEDS REPLACING • ANODIZED TACTICAL ALUMINUM HOUSING, • SPECS: 2369 LUMENS (HIGH), 261 LUMENS (LOW), 1 HR 30 MIN RUN TIME (HIGH): BEAM INTENSITY: 4537 CD, BEAM DISTANCE: 135 M FIREPOINT 2350LM DOFOCUS FLASHLIGHT

REAR AXLE BEARING PULLER SET

PULLERS ALLOW FOR THE REMOVAL OF SEMI-FLOATING REAR AXLE BEARING

• DECREASE DAMAGE AND INCREASE THE NUMBER OF APPLICATIONS • USE WITH 5/8” - 18 UNF THREAD SLIDE HAMMER

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W2405 FIREPOINT 2350LM DUOFOCUS

$47.95

TECH KITS DELUXE COMPRESSION TESTER KIT

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS $37.95 7 PC FUEL/ TRANS LINE DISCONNECT SET W89326 REAR AXLE BEARING PULLER

SEPARATES FITTINGS ON FUEL LINES, FILTERS, TANK RETURN LINES, OIL COOLER LINES, AUTOMATIC TRANSMISSION OIL COOLER LINES AND TRANSMISSION COOLER LINES

2-1/2” 300 PSI GAUGE

• 5 THREADED ADAPTERS TO COVER MOST GAS ENGINES • 10 TO 18 mm THREADED ADAPTERS • INCLUDES HARD TO FIND 16 mm X 1.5 ADAPTER

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89330 7PC. FUEL/ TRANS LINE DISCONNECT SET

$43.95

VALVE SPRING COMPRESSOR

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W80584 DELUXE COMPRESSION TESTOR $37.95

ALTERNATOR PULLY SERVICE KIT

• FOR SERVICING OVERHEARD VALVE ENGINE WITH CYLINDER HEAD REMOVED • INCLUDES SMALL AND LARGE JAWS FOR MULTIPLE APPLICATIONS

REMOVE THE ONE WAY CLUTCH OR DECOUPLER PULLEYS FOUND ON 1997 TO CURRENT YEAR VEHICLES

• TIME SAVING TOOL THAT REDUCES COST OF A FULL ALTERNATOR REPLACEMENT

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89409 VALVE SPRING COMPRESSOR

$67.95

MASTER BALL JOINT ADAPTER SET

PTS

W80724 ALTERNATOR PULLY SERVICE KIT $73.95

PISTON RING COMPRESSOR SET

INCLUDES ALL RECEIVING TUBES REMOVING AND INSTALLING ADAPTERS NEEDED TO

INCLUDES SIX SIZES OF BANDS FOR MULTIPLE APPLICATIONS

WORK ON MOST GM, FORD AND DODGE TWO AND FOUR WHEEL DRIVE VEHICLES THROUGH 1997

EXPANDS W39304 KIT

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89410 PISTON RING COMRPRESSOR SET

$ 75.95

PTS

W89305 MASTER BALL JOINT ADAPTER

$129.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

FIREPOINT LED HEADLAMP

4 IN 1 BALL JOINT PRESS KIT

SERVICE MOST CAR AND LIGHT TRUCK U- JOINTS

• QUICKLY AND EASILY REMOVES RIGHT OR LEFT THREADED STUDS WITH NO DAMAGE TO THREADS • 3/8” DRIVE, 1/4 AND 5/16”, 1/2” DRIVE, 3/8” AND 7/16”

• 4X4 ADAPTERS FOR 1967 TO CURRENT 4WD VEHICLES WITH DANA 44 AXLES • EXPANDS W89305 KIT

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS PTS

W89413 4 PC SAE STUF PULLER SET W89414 4 PC METRIC STUD PULLER SET

$31.95 $31.95

PTS

W89304 4 IN 1 BALL JOINT ADAPTER

$119.95

10 PC NOID & IAC LIGHT SET TESTS ELECTRONIC FUEL INJECTION SYSTEMS ON GM TBI, BOSCH PFI, FORD TBI, GM PFI, GEO TBI, GM SCPI, BOSCH 2 AND GM MULTEC2 EQUIPPED VEHICLES •

5 TON PULLER SEPARATOR SET

INCLUDES POPULAR SPLITTERS 2” AND 3”

FOUR SETS OF HEX PUSH PULLER LEGS THE 5” PULLER CROSS-BAR WITH A 6-1/4’ FORCING SCREW CAN BE USED INDEPENDENTLY

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W87128 5 TON BAR PULLER

$71.95

PTS

W8951 10 PC. NOID & IAC LIGHT SET

$33.95

DISC BRAKE CALIPER SERVICE SET

COIL SPRING COMPRESSOR

FOR INSTALLING NEW DISC BRAKE PADS ON MANY IMPORT AND DOMESTIC 4 WHEEL DISC BRAKE VEHICLES INCLUDES ADAPTERS FOR FRONT CALIPER PISTON RETRACTION

FOR USE ON MOST AUTOMOTIVE AND LIGHT TRUCK APPLICATIONS CHROME MOLY STEEL JAWS

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89311 COIL SPRING COMPRESSOR

$37.95

PTS

W89200 DISC BRAKE CALIPER SERVICE SET

$63.95

5 PC FRONT END SERVICE KIT

5 PC. 12 PT. AXLE NUT SOCKET

CHROME MOLY CONSTRUCTION FOR ADDED STRENGTH FITTED BLOW MOLDED STORAGE CASE CONTAINS: 30. 32, 34, 36 AND 39 mm

FOR REMOVAL OF MOST TYPES OF PITMAN ARMS, TIRE RODS AND BALL JOINTS FOUND ON AUTOMOTIVE AND LIGHT TRUCK APPLICATIONS

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89303 5 PC. FRONT-END SERVICE SET

$109.95

PTS

W89316 5 PC. 12 POINT AXLE NUT SET

$55.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

9 PC AXLE NUT SOCKET SET FOR REMOVAL OR INSTALLATION OF AXLE NUTS. • 1/2” DRIVE 6 POINT DESIGN. HEAVY DUTY CHROME MOLY ALLOY STEEL CONSTRUCTION. • •

DIESEL COMPRESSION TEST KIT

SIZES: 29, 30, 31, 32, 33, 34, 35, 36 AND 38MM

• INCLUDES 9 ADAPTERS FOR POPULAR CARS AND TRUCKS • TESTS COMPRESSION THROUGH BOTH GLOW PLUG AND INJECTOR HOLES

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89318 9 PC. AXLE NUT SOCKET SET

$97.95

PROFESSIONAL STRUT SPRING COMPRESSOR

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89731 DIESEL COMPRESSION TEST KIT

$49.95

A/C MANIFOLD TEST KIT

FOR MOST AUTOMOTIVE AND LIGHT TRUCK APPLICATIONS INCLUDES LOCKING PINS FOR ADDITIONAL SAFETY

• • •

50” LONG HOSE LENGTH HIGH QUALITY BRASS FITTINGS 0-120 PSI LOW SIDE, 0-500 PSI HIGH SIDE

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89322 PROFESSIONAL STRUT SPRING COMPRESOR

$43.95

PTS

W89730 A/C MANIFOLD TEST KIT

$87.95

23 PC TERMINAL RELEASE KIT

10 PC. BEARING & SEAL INSTALLER KIT

NINE DISC TOOL SIZES FIT MOST STANDARD WHEEL BEARINGS INCLUDES DRIVER HANDLE WITH BOLT

SIZES: 1.565 TO 3.180”

• CONTAINS TERMINAL RELEASE TOOL FOR MOST DOMESTIC, EUROPEAN AND JAPANESE CARS AND TRUCKS • APPLICATION REFERENCE CHART INCLUDED

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89715 10 PC BEARING & SEAL INSTALLER KIT

$63.95

LINE CODE

PART NO.

DESCRITPION

PRICE

LEAK DOWN TEST KIT

PTS

W89732 23 PC. TERMINAL RELEASE KIT

$129.95

COOLING SYSTEM PRESSURE TESTER KIT

• QUICKLY REVEALS EXTERNAL COOLING SYSTEM LEAKS • INCLUDES HIGH QUALITY HAND PUMP AND 12 ADAPTERS TO FIT THE MOST POPULAR DOMESTIC AND IMPORT CARS AND LIGHT TRUCKS

• HELPS IDENTIFY CAUSES OF LOW CYLINDER COMPRESSION • ADJUSTABLE PRESSURE REGULATOR • 12 mm and 14 mm THREAD ADAPTERS

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89733 COOLING SYSTEM PRESSURE TESTER KIT

$129.95

PTS

W89729 LEAK DOWN TEST KIT

$51.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

PULLEY PULLER & INSTALLER KIT

UNIVERSAL AIRVAC COOLANT REFILLER

• QUICK AND EASY TO USE, REQUIRES SHOP AIR • UNIVERSAL ADAPTER FOR USE ON MOST CAR AND LIGHT TRUCK RADIATORS

• FOR MOST ALTERNATOR AND POWER STEERING PULLEYS • INCLUDES POWER STEERING LINE DISCONNECT TOOL

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89734 UNIVERSAL AIRVAC COOLANT REFILLER

$61.95

PTS

W89708 PULLEY PULLER/ INSTALLER KIT

$41.95

HARMONIC BALANCER INSTALLER

16 PC. SERPENTINE BELT TOOL

SET INCLUDES THE TRADITIONAL INSTALLER ADAPTERS AS WELL AS LONG REACH ADAPTERS FOR LATE MODEL APPLICATIONS

• REMOVE AND INSTALL BELTS ON SERPENTINE SYSTEMS USING SPRING LOADED IDLER PULLEYS • TWO EXTENSIONS CAN BE BOLTED ON FOR HARD TO REACH AREAS

HEAVY- DUTY FORCING SCREW HAS INTERNAL THREADS TO FIT THE THREADED ADAPTERS

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89716 16 PC SERPENTINE BELT TOOL

$39.95

PTS

W89710 HARMONIC BALANCER INSTALLER $39.95

SLIDE HAMMER PULLER SET

HARMONIC BALANCER PULLER

• FOR REMOVAL AND INSTALLATION OF HARMONIC BALANCERS ON MOST AUTOMOTIVE AND LIGHT TRUCK APPLICATIONS • MASTER SET INCLUDES NECESSARY BOLTS AND ADAPTERS FOR MOST APPLICATIONS

• CONTAINS SLIDE HAMMER WITH MULTIPLE ATTACHMENTS: 2/3 JAW, INTERNAL/ EXTERNAL PULLERS, REAR AXLE PULLER, LOCKING PLIERS ADAPTER, PULLER HOOK AND DENT PULLER

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89711 HARMONIC BALANCER PULLER

$89.95

PTS

W89725 SLIDE HAMMER PULLER SET

$109.95

COMPACT HARMONIC BALANCER PULLER

MASTER FUEL INJECTOR TEST KIT

REMOVE DAMPER PULLEYS IN TIGHT ENGINE COMPARTMENTS WITHOUT REMOVING RADIATOR

• QUICKLY AND ACCURATELY DIAGNOSE FUEL INJECTION PROBLEMS • FOR MOST FOREIGN AND DOMESTIC FUEL SYSTEMS • INCLUDES: UNIVERSAL INLINE ADAPTER FOR UNIQUE SYSTEMS

• JAW DESIGN PROVIDES GREATER STRENGTH, CLEVIS PINS ALLOW JAWS TO BE QUICKLY REMOVED AND INSTALLED

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W89712 COMPACT HARMONIC BALANCER PULLER

$51.95

PTS

W89726 MASTER FUEL INJECTOR TEST KIT

$139.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

VACCUM PUMP KIT

DIGITIAL TRUCK TRIE PRESSURE GAUGE

Digital Truck Tire Pressure Gauge eliminates the inaccuracy of traditional tire pressure gauges. Gauge measures 5 to 150 psi, and is accurate to 1psi ± Dual head air chuck, back light display with a LED spot for siting valves at night.

• •

Measures in PSI, BAR, KPA

Professional quality for extended service life.

• Designed to meet the need of the larger truck and trailer rigs.

LINE CODE PART NO. DESCRITPION

PRICE

LINE CODE • BLEEDS BRAKES, TESTS VACUUM SWITCHES AND REMOVES FLUID • DURABLE STEEL CONSTRUCTION • INCLUDES: TUBES, VARIOUS ADAPTERS AND CONTAINERS AIR TOOL ACCESSORIES PART NO. DESCRITPION PRICE PTS W89727 VACCUM PUMP KIT $39.95

PTS

60311 DIGITAL TRUCK TIRE PRESSURE GAUGE $21.95

AIR TOOLS

UTILITY CUT OFF TOOL

FOR CUTTING SHEET METAL, FIBERGLASS, BOLTS ETC. METAL BLADE GUARD FOR PROTECTION ARBOR HOLE SIZE: 3/8” FREE SPEED RPM: 22,000; AVERAGE CFM: 4

NON-AEROSOL LIQUID SPRAYER

• •

• • • •

80-150 PSI OPERATING PRESSURE USES NO AEROSOL PROPELLANTS REUSABLE AND REFILLABLE PRESSURIZE WITH YOUR COMPRESSOR AND YOU’RE READY TO SPRAY

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

M563DB UTILITY CUT OFF TOOL

$23.95

1/4” HEAVY DUTY DIE GRINDER

BUILT-IN AIR REGULATOR FOR PRECISE SPEED CONTROL

VARIABLE SPEED SAFETY THROTTLE

LINE CODE

PART NO.

DESCRITPION

PRICE

INCLUDES INLINE OILER, TOOL OIL, FEMALE PLUG, WRENCHES

PTS

M715 NON-AEROSOL LIQUID SPRAYER

$31.95

AIR BLOW GUN W/ 3” EXTENSION

• COLLET SIZE: 1/8 AND 1/4”; FREE SPEED RPM: 22,000; AVERAGE CFM:4

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

M566DB 1/4” HD DIE GRINDER

$21.95

• •

COMFORT GRIP HANDLE

1/4” ANGLE HEAD DIE GRIDNER

SET CONTAINS: 3” EXTENSION NOZZLE, COMFORT GRIP HANDLE, QUICK CONNECT COUPLER

90 DEGREE ANGLE HEAD DESIGN ALLOWS USE IN CONFINED AREAS COLLETE SIZE: 1/8 AND 1/4” FREE SPEED RPM: 20,000

• • •

LINE CODE

PART NO.

DESCRITPION

PRICE

AVERAGE CFM: 4

PTS

M686 AIR BLOW GUN W/ 3” EXTENSION

$7.95

TIRE SERVICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

M656 1/4” ANGLE HEAD DIE GRINDER

$37.95

DIGITAL TREAD DEPTH

AIR HAMMER WITH 4 CHISELS

BUILT IN AIR REGULATOR FOR PRECISE SPEED CONTROL

• •

LARGE LCD DISPLAY METRIC/ INCH SYSTEM INTERCHANGEABLE DESIGNED TO FACILITATE QUICK AND EASY READING OF TIRE TREAD DEPTH

• •

INCLUDES 4 CHISELS QUICK CHANGE COIL SPRINT RETAINER STROKE LENGTH: 1.7” FREE SPEED BPM: 4,500 AVERAGE CFM: 4

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

63010 DIGITAL TREAD DEPTH GAUGE

$9.95

PTS

M550DB AIR HAMMER W/ 4 CHISELS

$19.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

1/2” DR IMPACT WRENCH

HYBRID AIR HOSE

PUSH BUTTON DIRECTION CHANGE FOR QUICK AND EASY OPERATION BUILT IN AIR REGULATOR FOR PRECISE SPEED CONTROL MAX TORQUE (FT./ LB.): 230

• • • • •

EXTREMELY FLEXIBLE RUBBER AND PVC BEND RESTRICTORS AT EACH END FOR LONG LIFE 1/4” NPT BRASS MALE FITTINGS

• • •

WORKING PRESSURE: 300 PSI BURST PRESSURE: 900 PSI

FREE SPEED RPM: 7,500

AVERAGE CFM: 4

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE $27.95 $14.95

PTS

M558DB 1/2” DR IMPACT WRENCH

$37.95

PTS PTS

M617 50’ X 3/8” M628 25’ X 3/8”

3/8” DR AIR RATCHET

SPRAY GUNS

TRIPLE PLANETARY GEAR DESIGN COMPACT HEAD FOR EASY ACCESS IN TIGHT AREAS WORKING TORQUE (ft./ lbs.) 10-50; FREE SPEED RPM: 150; AVERAGE CFM: 4

HVLP SPRAY GUN NEEDLE & NOZZLE SET

ECONOMICAL, ALL-PURPOSE GUN 1.41 mm SPRAY NOZZLE AND NEEDLE ASSEMBLY LOCKING AIR PRESSURE REGULATOR WITH 0 TO 80 PSI GAUGE MULTI WRENCH AND CLEANING BRUSH

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

M560DDB 3/8” DR AIR RATCHET

$39.95

• • •

6” DUAL ACTION SANDER

CUP: 600cc CFM: 7-9

BUILT-IN AIR REGULATOR FOR PRECISE SPEED CONTROL CAST IRON CYLINDER PAD DIAMETER: 6” FREE SPEED RPM: 10,000

LINE CODE PART NO. DESCRITPION

PRICE

• • • •

PTS

M4710 HVLP SPRAY GUN NEEDLE & NOZZLE SET $47.95

HVLP GRAVITY FEED SPRAY GUN SET

AVERAGE CFM: 5

LINE CODE

PART NO.

DESCRITPION

PRICE

ALL PURPOSE SPRAYS PRIMERS, BASE COATS AND CLEAR COATS FULL ADJUSTABLE SPRAY PATTERN INCLUDES MULTI-WRENCH, CLEANING BRUSH, SOCKET AND FLUID FILTER 1.5mm NEEDLE ADN NOZZLE SET OPERATES AT 18-60 PSI

PTS

M568DB 6” DUAL ACTION SANDER AIR HOSE & REELS

$35.95

• • •

RUBBER AIR HOSES

KINK, ABRASION, OZONE AND WEATHER RESISTANT

• • •

OIL RESISTANT COVER 1/4” NPT BRASS FITTINGS

LINE CODE PART NO. DESCRITPION

PRICE

UP TO 300 PSI WORKING PRESSURE

PTS

M710 HVLP GRAVITY FEED SPRAY GUN SET

$53.95

PRODUCTION SPRAY GUN

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS PTS

M601P 25’ X 3/8” M603P 50’ X 3/8”

$16.95 $23.95

HYBRID AIR HOSE & REEL RETRACTABLE REEL WITH FULLY ENCLOSED CASE •

AUTOMATIC ROLLER GUIDE ENSURES SMOOTH AND EVEN RECOIL EXTREMELY FLEXIBLE BLEND OF RUBBER AND PVC BEND RESTRICTORS AT EACH END FOR LONG LIFE 1/4” NPT BRASS MALE FITTINGS MAXIMUM WORKING PRESSURE: 300 PSI

• •

NEEDLE AND NOZZLE SET

• • •

1000cc SPUN ALUMINUM SIPHON CUP

• SPECS: NOZZLE: 1.8mm, SPRAY PATTERN: 6-8 INCHES, CUP: 1,000cc CFM: 8.5-12

BURST PRESSURE: 600 PSI

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

M613 HYBRID AIR HOSE & REEL

$87.95

PTS

M576DB PRODUCTION SPRAY GUN

$37.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

HARDWARE KITS

419 PC METRIC O-RING W5203

1,000 PC COTTER PIN W5204

180 PC VITON O-RING W5239

200 PC SPRING W5200

270 PC HNBR O-RING W5201

407 PC O-RING W5202

$19.95

$7.95

$8.95

$14.95

$14.95

$11.95

300 PC EXTERNAL SNAP RING W5212

560 PC COTTER PIN W5205

150 PC LARGE COTTER PIN W5206

160 PC WIRE TERMINAL W5213

300 PC E-CLIP W5208

150 PC HAIR PIN W5210

$8.95

$10.95

$8.95

$7.95

$7.95

$13.95

125 PC RUBBER GROMMET W5214

110 PC COPPER WASHER W5217

80 PC VACUUM CAP W5232

60 PC DRAIN PLUG GASKET W5234

27 PC OIL DRAIN PLUG W5235

70 PC GREASE FITTING W5215

$8.95

$11.95

$12.95

$9.95

$9.95

$23.95

40 PC OIL DRAIN PLUG W5236

120 PC ROLL PIN W5340

120 PC FUSE W5368

120 PC MINI FUSE W5369

33 PC MASTER FUSE W5370

30 PC MINI FUSE W5371

$35.95

$7.95

$10.95

$11.95

$8.95

$5.95

60 PC STANDARD FUSE W5373

60 PC AGC GLASS FUSE W5375

30 PC STANDARD FUSE W5378

16 PC MAXI FUSE W5374

15 PC MICRO FUSE W5376

30 PC MINI FUSE W5377

$8.95

$15.95

$9.95

$7.95

$19.95

$13.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

171 PC HEAT SHRINK

4 PC FLARE NUT WRENCH SETS

• •

SHRINK RATIO: 2:1

W30430-SAE: SIZES 1/4 X 5/16 TO 5/8 X 11/16” W30431-MET: SIZES 9 X 11 TO 16 X 18mm USE WITH FLARE NUTS AND OTHER SOFT FITTINGS NICKEL CHROME PLATED TO RESIST CORROSION

INCLUDES VARIOUS DIAMETERS AND LENGTHS FROM 1-3/16 TO 39-3/8”

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W540 171 PC HEAT SHRINK

$17.95

LINE CODE

PART NO.

DESCRITPION

PRICE

HAND TOOLS

PTS PTS

W30430 SAE FLARE NUT WRENCH SET W30431 METRIC FLARE NUT WRENCH SET

$23.95 $23.95

24” BOLT CUTTER

22 PC WRENCH SET

PRECISION MILLED AND DROP FORGED STEEL JAWS

DURABLE PROTECTIVE ENAMEL PAINT

DURABLE PLASTIC RACK SEPARATES FOR HANDY STORAGE SIZES: 1/4 TO 7/8 AND 9 TO 19 mm

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

BC-24 24” BOLT CUTTER

$19.95

10” CABLE CUTTERS

LINE CODE

PART NO.

DESCRITPION

PRICE

CUTS UP TO: 2/0 (1/2”) SOFT ALUMINUM, 4/0 (3/8”) SOFT COPPER, AND 7/8” COAXIAL CABLE

PTS

W1069 22 PC WRENCH SET

$27.95

IMPACT TOOLS

1/2” TO 3/8” IMPACT ADAPTER

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W30729 10” CABLE CUTTERS WRENCH SETS

$13.95

• DROP FORGED CHROME VANADIUM STEEL FOR STRENGTH AND DURABILITY • LARGE SIZE LASER ETCHING FOR EASY IDENTIFICATION

7 PC RATCHETING WRNECH SETS

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

M963 1/2” - 3/8” IMPACT ADAPTER

$2.89

8 PC IMPACT ADAPTOR SET

• •

W30630-SAE: SIZES 5/16 TO 3/4” W30631-MET: SIZES 8 TO 18mm

• FEATURES 72 TEETH RATCHETING GEAR FOR POWER, SPEED AND DURABILITY 5 DEGREES TO TURN

• SIZES: 1/4” TO 3/8”, 3/8” TO 1/4”, 3/8” TO 1/2”, 1/2” TO 3/8”, 1/2” TO 3/4”, 3/4” TO 1/2”, 3/4” TO 1” AND 1” (F) TO 3/4” (M)

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS PTS

W30630 SAE RATCHETING WRENCH SET W30631 METRIC RATCHETING WRENCH SET

$53.95 $53.95

PTS

M795 8 PC IMPACT ADAPTER SET

$31.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

1/2” DR IMPACT UNIVERSAL JOINT

8 PC 1/2” DR IMPACT BIT SET

W32090-SAE: SIZES 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 AND 3/4” W32091-MET: SIZES 6, 7, 8, 10, 12, 14, 17 AND 19 mm W32092-STAR: SIZE T30, T40, T45, T47, T50, T55, T60 AND T70

DROP FORGED CHROME VANADIUM STEEL FOR STRENGTH AND DURABILITY LARGE SIZE LASER ETCHING FOR EASY IDENTIFICATION

• ONE PIECE CHROME MOLYBDENUM STEEL FOR STRENGTH AND DURABILITY • LARGE SIZE LASER ETCHING FOR EASY IDENTIFICATION • INCLUDES METAL SOCKET RAIL FOR STORAGE

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE PART NO.

DESCRITPION

PRICE

PTS

M968 1/2” IMPACT UNIVERSAL JOIN

$9.85

7 PC IMPACT U-JOINT/ ADAPTER SET

PTS PTS

W32090 METIRC: 6, 7, 8, 10, 12, 14, 17 and 19 mm $43.95

W32091 SAE: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 and 3/4”

$43.95

U-JOINTS: 1/4, 3/8 AND 1/2”

• ADAPTERS: 1/4 (F) TO 3/8 (M), 3/8 (F) TO 1/4 (M), 3/8 (F) TO 1/2 (M) AND 1/2 (F) TO 3/8” (M)

PTS

W32092 STAR: T30, T40, T45, T47, T50, T55, T60 and T70

$43.95

9 PC 3/8” IMPACT BIT SET

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W30937 7 PC IMPACT U-JOINT/ ADAPTER SET

$19.95

38 PC IMPACT SOCKET SET

• •

IMPACT GRADE WITH POL RESISTANT FINISH INCLUDES SOCKET STORAGE RAIL

INCLUDES SAE & METRIC, DEEP AND STANDARD SIZES SIZES: 3/8” DR DEEP: 5/16 TO 3/4” AND 8 TO 18mm 1/2” DR: 7/16 TO 1” AND 11 TO 24mm

LINE CODE PART NO.

DESCRITPION

PRICE

PTS

W38963 SAE HEX- 1/4” DR: 1/4 - 3/8”, 3/8” DR: 7/16 - 3/4”

$27.95

PTS

W38964 METRIC HEX- 1/4” DR: 6-10mm, 3/8” DR: 12-19mm

$27.95

12 PT- 1/4” DR: M4, M5, M6 & M8; 3/8” DR: M10 & M12; 1/2” DR TAMPER RESISTANT: MT14, MT16 & MT18

PTS

W38965

$33.95

LINE CODE

PART NO.

DESCRITPION

PRICE

SOCKET SETS

PTS $53.95 5 PC 1/2” DR THINK WALL IMPACT SOCKET M796 38 PC IMPACT SOCKET SET

HOLLOW DESIGN ALLOWS ROOM FOR REMOVING LONGER BOLTS COLOR CODED FOR EASY IDENTIFICATION SIZES: 17mm, 19mm (3/4), 21mm, 13/16 and 7/8”

21 PC SAE 3/4” DR SOCKET SET

• •

DROP FORGED STEEL

20” RATCHET, 18” FLEX HANDLE, 4 AND 8” EXTENSIONS ALSO INCLUDED

SIZES: 3/4 TO 2”

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W32902 1/2” THINK WALL IMPACT SOCKET

$35.95

10 PC IMPACT STAR BIT SOCKET SET

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W1180 21 PC SAE 3/4” DR SOCKET SET

$93.95

10 PC METRIC HEX BIT SOCKET SET

• •

IMPACT GRADE WITH OIL RESISTANT FINISH INCLUDES SOCKET STORAGE RAIL

• HARDENED AND TEMPERED CHROME VANADIUM STEEL SOCKETS • PROFESSIONAL SAND FINISH & HARDENED ALLOY STEEL BITS • SIZES: 2 TO 10mm

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W38961 1/4” DR: T10- T30, 3/8” DR: T40-T50

$29.95

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W38962 TAMPER RESISTANT 1/4” DR: T10- T30, 3/8” DR: T40-T50

$31.95

PTS

W1388 10 PC METRIC HEX BIT SOCKET SET

$17.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

6 PC 1/2” DR HEX BITS

3/8” DR SPARK PLUG SOCKET

• • • • •

W38160: 5/8 X 2-9/16” W38161: 5/8 X 3-1/4”

• •

RECESSED EDGES

W38164: 13/16” W38170: 9/16”

SIZES: 12, 14, 17mm, 3/8, 1/2 and 9/16”

SOCKET OPENINGS ARE DESIGNED TO REDUCE FASTENER ROUNDING CHROME VANADIUM ALLOY STEEL CONSTRUCTION FOR STRENGTH AND DURABILITY POLISHED NICKEL CHROME PLATED FINISH RESISTS CORROSION

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W38886 6 PC 1/2” DR HEX BITS

$19.95

1/2” DR TEARDROP RATCHET

CHROME VANADIUM STEEL CONSTRUCTION FULLY POLISHED NICKEL CHROME PLATED FINISH RESISTS CORROSION

RECESSED EDGES

LINE CODE

PART NO.

DESCRITPION

PRICE

• LARGER GEAR TEETH FOR HIGHER TORQUE AND ADDED GEAR STRENGTH

PTS PTS PTS PTS

W38160 5/8 X 2-9/16” W38161 5/8 X 3-1/4”

$3.95 $6.95 $3.95 $3.95

LINE CODE

PART NO.

DESCRITPION

PRICE

W38164 13/16” W38170 9/16”

PTS

W32101 1/2” DR TEARDROP RATCHET

$23.95

18” 1/2” DR PRY BAR/ FLEX HANDLE

9 PC BOLT EXTRACTOR SETS

• • • • •

3 TOOLS IN ONE

3/8” DR. BREAKER BAR 1/2” DR. BREAKER BAR

18” PRY BAR 18” LENGTH

• • •

W38916-SAE: SIZES 1/4 TO 5/8” W38917-MET: SIZES 8 TO 19mm PATENTED GRIPPING EDGES REMOVE OLD, STRIPPED RUSTED OR PAINTED NUTS/ BOLTS

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS $19.95 1/2” DR FLEX HEAD LONG HANDLE RATCHET CHROME VANADIUM ALLOY STEEL CONSTRUCTION FOR STRENGTH AND DURABILITY • POLISHED NICKEL CHROME PLATED FINISH RESISTS CORROSION • DOUBLE- INJECTION MOLDED HANDLE W32127 18” 1/2” DR PRY BAR/FLEX HANDLE • 1/2” DR, 36 GEAR TEETH, OVER LENGTH 23-3/4” •

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W38916 SAE: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 3/4, 11/16 & 5/8” W38917 METRIC: 8, 10, 11, 12, 13, 14, 16, 17 & 19 mm

$39.95

PTS

$39.95

LINE CODE PART NO. DESCRITPION

PRICE

5 PC BOLT EXTRACTOR SET

PTS

W32181 1/2” DR FLEX HEAD LONG HANDLE RATCHET

$45.95

1/4” DR TEAR DROP RATCHET

PATENTED GRIPPING EDGES REMOVE OLD, STRIPPED, RUSTED OR PAINTED NUTS AND BOLTS SIZES: 5/16 (8mm), 3/8 (10mm), 1/2 (13mm), 11/16 and 3/4” (19mm)

CHROME VANADIUM STEEL CONSTRUCTION FULLY POLISHED NICKEL CHROME PLATED FINISH RESISTS CORROSION

• LARGER GEAR TEETH FOR HIGHER TORQUE AND ADDED GEAR STRENGTH

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W38918 5 PC BOLT EXTRACTOR SET

$23.95

PTS $15.95 1/4” DR FLEX HEAD LONG HANDLE RATCHET • 1/4” DR, 36 GEAR TEETH, OVERALL LENGTH 12” • CHROME VANADIUM ALLOY STEEL CONSTRUCTION FOR STRENGTH AND DURABILITY • POLISHED NICKEL CHROME PLATED FINISH RESISTS CORROSION • DOUBLE- INJECTION MOLDED HANDLE W36101 1/4” DR TEARDROP RATCHET

3/8” TEARDROP RATCHET

CHROME VANADIUM STEEL CONSTRUCTION

• FULLY POLISHED NICKEL CHROME PLATED FINISH RESISTS CORROSION • LARGER GEAR TEETH FOR HIGHER TORQUE AND ADDED GEAR STRENGTH

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W36181 1/4” DR FLEX HEAD LONG HANDLE RATCHET

$23.95

PTS

W38101 3/8” DR TEARDROP RATCHET

$19.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

3/8” DR FLEX HEAD LONG HANDLE RATCHET

5 PC PRY BAR SET

BLACK OXIDE FINISH TO RESIST CORROSION DURABLE, HIGH VISIBILITY PVC HANDLES PRY BARS: 8,12,18 AND 24”

• 3/8” DR, 36 GEAR TEETH, OVERALL LENGTH 18” • CHROME VANADIUM ALLOY STEEL CONSTRUCTION FOR STRENGTH AND DURABILITY • POLISHED NICKEL CHROME PLATED FINISH RESISTS CORROSION • DOUBLE- INJECTION MOLDED HANDLE

• •

ROLL TYPE: 16”

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W2025 5 PC PRY BAR SET

$23.95

30” ALIGNMENT BAR

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W38181 3/8” DR FLEX HEAD LONG HANDLE RATCHET

$31.95

• •

7/8 INCH DIAMETER ROUND STOCK 30 INCH FORGED ALLOY STEEL.

3 PC UNIVERSAL JOINT SET

LINE CODE • HEAT-TREATED TO RESIST BENDING OR BREAKING. • ALIGNMENT POINT ON ONE END, BENT CHISEL END ON THE OTHER. BIT SETS PART NO. DESCRITPION PRICE PTS W2033 30” ALIGNMENT BAR $21.95

POLISHED NICKEL CHROME PLATED FINISH RESISTS CORROSION DRIVE SIZES: 1/4, 3/8 AND 1/2”

LINE CODE

PART NO.

DESCRITPION

PRICE

148 PC MASTER BIT SET

PTS

W30933 3 PC UNIVERSAL JOINT SET

$9.95

4 PC SOCKET ADAPTER SET

HUGE ASSORTMENT OF POPULAR AND HARD-TO-FIND BITS INCLUDES: 1”, 2” AND 3” PHILLIPS, SLOTTED, SQUARE, STAR, POSI, TAMPER-RESISTANT STAR AND HEX BITS ALSO INCLUDES CLUTCH DRIVE, SPLINE DRIVE, SPANNER, 3 AND 4-WING BITS, AND 1/4” AND 3/8” SOCKET ADAPTERS

ADAPTERS: 1/4(F) TO 3/8 (M), 3/8 (F) TO 1/4 (M), 3/8 (F) TO 1/2 (M) AND 1/2 (F) TO 3/8” (M)

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS $6.95 7 PC UNIVERSAL JOINT & ADAPTER SET W30934 4 PC SOCKET ADAPTER SET

PTS

W1725 148 PC MASTER BIT SET

$25.95

12 PC STAR BIT SOCKET SET

U-JOINTS: 1/4, 3/8 AND 1/2”

• • •

SIZES: 1/4” DR: T10 TO T30

• ADAPTERS: 1/4 (F) TO 3/8 (M), 3/8 (F) TO 1/4 (M), 3/8 (F) TO 1/2 (M) AND 1/2 (F) TO 3/8 (M)”

3/8” DR: T40 TO T55

1/2” DR: T60

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W30935 7 PC UNIVERSAL JOINT & ADAPTER SET

$11.95

PRY BARS

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W38802 12 PC STAR BIT SOCKET SET

$19.95

4 PC PRY BAR SET

8 PC 3/8” DR HEX BIT SETS

• •

W38870-SAE: SIZES 1/8 TO 3/8” W38890-MET: SIZES 3 TO 10mm

• • •

BLACK OXIDE FINISH TO RESIST CORROSION DURABLE, HIGH VISINILITY PVC HANDLES

SIZES: 8,12, 18 AND 24”

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS PTS

W38870 SAE- 1/8” TO 3/8” W38890 METRIC- 3 TO 10 mm

$17.95 $17.95

PTS

W2020 4 PC PRY BAR SET

$18.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

SCREWDRIVERS

HEX KEY SETS

6 PC STRIKE CAP SCREWDRIVER SET

PRODUCTION SPRAY GUN

• GO-THROUGH SOLID SHAFTS WITH HEX DRIVE STRIKE END CAPS. • PROFESSIONAL STYLE HEAT RESISTANT HANDLES. • MAGNETIC TIPS.

W1711: •

TWO DRIVE ENDS: LONG END FOR HARD TO REACH AREAS, SHORT END FOR EXTRA TORQUE

LINE CODE

PART NO. DESCRITPION

PRICE

SIZES: 3/32 TO 3/8”

PTS

W1729 6 PC STRIKE CAPE SCREWDRIVER SET

$9.95

8 PC PRO SCREWDRIVER SET

OVERSIZED HANDLES FOR EASY USE

W1712: •

• • • •

MAGNETIC TIPS PH: #1 AND #2 SL: 3/16 AND 1/4” STAR: T15 AND T20

TWO DRIVE ENDS: LONG AND FOR HARD TO REACH AREA, SHORT END FOR EXTRA TORQUE

SIZES: 2.5, 3 TO 10 mm

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W80008 8 PC PRO SCREWDRIVER SET

$10.95

8 PC HIGH VISIBLE SCREWDRIVER SET • EASY TO FIND PRO-STYLE, ORANGE HANDLES • MAGNETIC TIPS • PH: #2 X 4, #1 X 3 AND #2 X 1-1/2” • SL: 3/8 X 8, 5/16 X 6, 1/4 X 4, 3/16 X 3 AND 1/4 X 1-1/2”

W1713: •

TWO DRIVE ENDS: LONG END FOR HARD TO REACH AREAS, SHORT ENT FOR EXTRA TORQUE

SIZES: T10 TO T40

LINE CODE PART NO. DESCRITPION

PRICE

LINE CODE

PART NO.

DESCRITPION

PRICE

PTS

W904 8 PC HIGH VISIBLE SCREWDRIVER SET

$9.95

PTS PTS PTS

W1711 SAE: 3/32” TO 3/8”

$13.95 $13.95 $13.95

HAMMERS

W1712 METRIC: 2.5, 3 TO 10mm W1713 STAR DRIVE: T10 TO T40 FILTER PLIERS

3 lbs CROSS PEIN & 3 lbs SLEDGE SET

SMALL OIL FILTER PLIER

• • •

HEAVY DUTY FIBERGLASS HANDLES ANTI-SHOCK, RUBBER CUSHION GRIPS, INCLUDES A 3 lbs SLEDGE AND A 3 lbs CROSS PEIN HAMMER

3-POSITION ADJUSTABLE PLIERS FITS MULTIPLE OIL FILTER SIZES SERRATED JAW TEETH FOR A SURE GRIP

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54310 SMALL OIL FILTER PLIER

$9.95

LARGE OIL FILTER PLIER

LINE CODE PART NO. DESCRITPION

PRICE

PTS

M7040B 3 LBS CROSS PEIN & 3 LBS SLEDGE SET

$23.95

3 lbs SLEDGE HAMMER

HEAVY DUTY FIBERGLASS HANDLE WITH ANTI-SHOCK CUSHION GRIP

3-POSITION ADJUSTABLE PLIERS FITS MULTIPLE OIL FILTER SIZES SERRATED JAW TEETH FOR A SURE GRIP

LINE CODE

PART NO.

DESCRITPION

PRICE

LINE CODE PART NO. DESCRITPION

PRICE

PTS

M7100 3 LBS SLEDGE HAMMER

$15.95

PTS

W54311 LARGE OIL FILTER PLIER

$9.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

LUBE & OIL EQUIPMENT

FLUID TRANSFER

SWIVEL FILTER WRENCH

SHAKER SIPHON HOSE

• • • •

TRANSFER FLUIDS WITH EASE MOVES UP TO 3.5 GALLONS A MINUTE SAFELY TRANSFER FUELS, GASOLINE, DIESEL, WATER AND MANY MORE LIQUIDS 6 FT ANTI-STATIC TUBE

SWIVEL HANDLE DESIGN PROVIDES ACCESS IN CONFINED AREAS REMOVES MOST SPIN ON TYPE FILTERS

LINE CODE PART NO. DESCRITPION

PRICE

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54154 SHAKER SIPHON HOSE

$9.95

PTS PTS

W54045 2-7/8 TO 3-1/4” W54046 2-15/16 TO 3-/3/4”

$5.95 $5.95

MARINE LOWER UNITY FLUID PUMP

15 PC DRAIN PLUG SOCKET SET

PATENTED DOUBLE THREADED CAP FITS BOTH THE QUART AND GALLON SIZE LUBRICANT 24” FLEXIBLE HOSE EASILY REACHES DIFFICULT TO ACCESS FILL PLUGS

• • • • •

HEX: 9, 10, 12, 14 AND 17 mm SQUARE: 7, 8, 11, 13mm, 5/16 AND 3/8”

FEMALE SQUARE: 10mm MALE TRIANGLE: 10mm TAMPER-PROOF TRIPLE SQUARE: 16mm

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54150 MARINE LOWER UNITU FLUID PUMP

$9.95

QUART/ GALLON FLUID PUMP

LINE CODE PART NO. DESCRITPION

PRICE

PTS W54284 15 PC DRAIN PLUG SOCKET SET CAP WRENCHES CANISTER TYPE OIL FILTER WRENCH

$35.95

UNIQUE DOUBLE THREADED CAP FITS BOTH QUART AND GALLON SIZE CONTAINERS CONVENIENT AND VERSATILE FOR HARD TO REACH PLACES

LINE CODE PART NO. DESCRITPION

PRICE

• •

FOR TOYOTA, LEXUS AND SCION SIX CUTS OUTS TO ENGAGE THE TABS ON THE FILTER CANISTERS USE A 1/2” DR RATCHET OR 21 mm HEX WRENCH

PTS

W1139 QRT/ GAL. FLUID PUMP

$6.95

QUICK RELEASE TRANSFER PUMP

64mm X 14 FLUTE CUT OUTS

• •

ALSO WORKS AS AN AIR PUMP INCLUDES: HAND OPERATED TRANSFER PUMP, (2) 48” X 1/2” DIAMETER CLEAR VIEW HOSES, 15” AIR PRESSURE HOSE, SNAP-SHUT VALVE AND INFLATION NEEDLE

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54076 CANISTER TYPE OIL FILTER WRENCH

$19.95

MAZDA CAP FILTER WRENCH

• •

FOR MAZDA, FORD, TOYOTA

DESIGNED TO FIT 75.6 mm 14 FLUTE FOUND ON 2.3 L 4- CYLINDER ENGINES USE A 1/2” DR. RATCHET OR 21mm HEX WRENCH

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W1156 QUICK RELEASE TRASNFER PUMP

$10.95

PUMPS DEF ROTARY BARREL PUMP

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54077 MAZDA CAP FILTER WRENCH

$12.95

OIL CARTRIDGE SOCKET SET

IDEAL FOR DEF (DIESEL EXHAUST FLUID)

RESISTANT TO GASOLINE, DIESEL, MACHINE OIL, ALCOHOL, ACIDIC FLUIDS AND MUCH MORE

LOW PROFILE SOCKETS ALLOW PROPER CLEARANCE WHEN REMOVING FILTER SIZES: 24, 27, 29, 30, 32, 36 AND 38 mm

• HAND OPERATED ROTARY LEVER ACTION DELIVERS APPROXIMATELY 7 GAL/ 100 REVOLUTIONS • POLYPROPYLENE BODY WITH PTFE VANES AIDS IN RESISTANCE TO HARD CHEMICALS • FITS ALL 5-55 GALLON PAILS/ DRUMS

LINE CODE PART NO. DESCRITPION

PRICE

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54085 OIL CARTRIDGE SOCKET SET

$35.95

PTS

W54285 DEF ROTARY BARREL PUMP

$69.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

12V OIL EXTRACTION PUMP

ALUMINUM GREASE GUN ZINC PLATED LEVER HANDLE WITH A PVC GRIP FOR COMFORT 3-WAY LOADING, ACCEPTS STANDARD 14 oz. CARTRIDGE, 4 JAW COUPLER WITH PROTECTIVE PVC CAP, PISTOL GRIP STYLE WITH PVC GRIPS W54291: • W54290: •

REMOVES UP TO 3 QUARTS PER MINUTE SELF PRIMING 12V 5 AMP DC PUMP CONNECTS DIRECTLY TO THE BATTERY INCLUDES: PUMP, HOSE, HOSE CLAMPS AND DETAILED INSTRUCTIONS

LINE CODE PART NO. DESCRITPION

PRICE

• PISTOL GRIP STYLE WITH PVC GRIPS, 3-WAY LOADING, ACCEPTS STANDARD 14 oz. CARTRIDGE, 4 JAW COUPLER WITH PROTECTIVE PVC CAP

PTS

W54170 12V OIL EXTRACTION PUIMP

$27.95

SUCTION GUN PERFECT FOR TRANSMISSION, •

DIFFERENTIALS, GEAR CASES, LOWER UNITS, CRANKCASES, ETC.

LINE CODE PART NO. DESCRITPION

PRICE

ZINC HEAD CAP; 12” FLEXIBLE HOSE, 1 PINT CAPACITY

PTS PTS

W54290 LEVER ACTION W54291 PISTOL GRIP

$21.95

$23.95 PROFESSIONAL PISTOL GRIP GREASE GUN

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54220 SUCTION GUN

$9.95

LEVER ACTION DISPENSER

• •

PISTOL GRIP ACTION FOR EASY USE AIR BLEEDER VALVE ELIMINATES AIR LOCK, 3-WAY LOADING

MANUAL OPERATION FOR QUICK CLEAN TRANSFERRING DISPENSES 2 oz. OF FLUID/ STROKE FOR USE WITH 25- 50 lbs/ 5 GALLON CONTAINERS INCLUDES 48” PVC HOSE PIPE WITH NOZZLE

ACCEPTS STANDARD 14 oz. CARTRIDGE OR BULK

• •

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54204 PROFESSIONAL PISTOL GRIP GREASE GUN

$17.95

AIR TANKS

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54232 LEVER ACTION DISPENSER

$29.95

GENERAL PURPOSE LEVER ACTION BARREL PUMP

AIR TANKS

GENERAL PURPOSE IDEAL FOR FUEL, WATER BASE AND ACIDIC SOLUTIONS DISPENSES 9 oz. / STROKE FITS 5 TO 55 GALLON DRUMS

• PORTABLE WITH HANDLE FOR EASY TRANSPORT • INDUSTRIAL GRADE AIR HOSE WITH STANDARD TIRE AIR CHUCK • 125 PSI MAXIMUM

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54268 GEN. PUR. LEVER ACTION BARREL PUMP $31.95

GREASE GUNS

LINE CODE PART NO. DESCRITPION

PRICE

PTS W100050 5 GALLON AIR TANK

$39.95 $59.95

PROFESSIONAL GREASE GUN

PTS

W10011 11 GALLON AIR TANK

5 GALLON TIRE BEAD SEATER

• SHORT STROKE “LEVER ACTION” FOR EASY USE IN TIGHT SPACES • AIR BLEEDER VALVE ELIMINATES AIR LOCK • USES STANDARD 14 oz. CARTRIDGE

• PERFECT FOR CARS, TRUCKS, 4X4, ATV, TRACTORS AND LAWN EQUIPMENT • PORTABLE •

HEAVY DUTY BALL VALVE ON BOTH AIR INLET AND EXHAUST PORT CAN WORKS ON TIRES UP TO 24.5”; 5 GALLON CAPACITY

LINE CODE PART NO. DESCRITPION

PRICE

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54202 PROFESSIONAL GREASE GUN

$16.95

PTS

W10012 5 GALLON TIRE BEAD SEATER

$ 129.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

BATTERY SERVICE

TARPS & TIE DOWNS

BATTERY TERMINAL CLEANER BRUSH

4 PC RATCHETING TIE DOWN SET

• • • •

LOCKING RATCHETS

REMOVES DIRT, DEBRIS AND CORROSION TO RESTORE ELECTRICAL CONTACT QUALITY STAINLESS STEEL BRUSHES CLEANS BOTH BATTERY POST AND TERMINALS ALL METAL CONSTRUCTION

PROTECTIVE COATED HOOKS EASY PUSH BUTTON RELEASE 900 lbs. MAXIMUM LOAD

• • •

LINE CODE PART NO. DESCRITPION

PRICE

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W147C BATTERY TERMINAL CLEANER BRUSH

$2.59

2 GALLON PLASTIC RADIATOR FILLER

PTS

W1440 4 PC RATCHETING TIE DOWN SET

$23.95

BLUE TARPS

ROPE SEWN ALONG EDGES FOR STRENGTH RUST RESISTANT GROMMETS

TOUGH POLYETHYLENE WON’T DAMAGE AUTOMOTIVE FINISHES IMPERVIOUS TO OIL, GASOLINE AND ANTIFREEZE WILL WITHSTAND NORMAL TEMPERATURE EXTREMES

LINE CODE PART NO. DESCRITPION

PRICE

LINE CODE PART NO. DESCRITPION

PRICE

PTS PTS PTS

W6002 6’ X 8’ W6004 8’ X 10’ W6006 10’ X 12’

$4.95 $7.95 $9.95

PTS

W54273 2 GALLON PLASTIC RADIATOR FILLER

$17.95

2 QUART BATTERY FILLER

SILVER TARPS

ROPE SEWN ALONG EDGES FOR STRENGTH RUST RESISTANT GROMMETS

• • •

SPRING LOADED FILLER VALUE DURABLE INJECTION MOLDED PLASTIC

• •

2 QUART CAPACITY

10 mil THICKNESS

LINE CODE PART NO. DESCRITPION

PRICE

LINE CODE PART NO. DESCRITPION

PRICE

PTS PTS

W7004 8’ X 10’ W7006 10’ X 12’

$13.95 $19.95

PTS

W54274 2 QRT BATTERY FILLER

$6.95

CARTS & DOLLIES

500lbs SHOP STAND

POLY SERVICE CART

• EASY ROLLING UTILITY CART WITH UPPER AND LOWER TRAYS • 2 SHELF UTILITY CART HOLDS UP TO 500 lbs TOTAL BUT IS LIGHT WEIGHT AND MANEUVERABLE • INDUSTRIAL DUTY POLYPROPYLENE CONSTRUCTION WON’T RUST, DENT OR CHIP • DIAMETER NON MARING CASTERS (TWO LOCKED AND TWO SWIVEL) • TOOL UTILITY CART HAS TOOL STORAGE AND CUP HOLDER ON THE HANDLE • TRAY SIZE: 30” L X 16” W X 3” DEEP • OVERALL DIMENTIONS: 39-3/4” L X 17” W X 33-1/4” H

DESIGNED TO HOLD LARGE PARTS

• PORTABLE, EASY TO ADJUST AND STORES FLAT • THICK FOAM PADDING PROTECTS PAINTED PARTS AND GLASS FROM BEING SCRATCHED • CAPACITY RATING: 500Llbs • ADJUSTABLE HEIGHT: 33 TO 44” • ADJUSTABLE WIDTH: 15 TO 34” • FIXED LENGTH: 40”

LINE CODE PART NO. DESCRITPION

PRICE

LINE CODE PART NO. DESCRITPION

PRICE

PTS

W54024 500lbs SHOP STAND

$39.95

PTS

W53991 POLY SERVICE CART

$119.95

PRICES ARE EFFECTIVE UNTIL AUG. 31, 2017

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30

Made with FlippingBook - Online Brochure Maker