MODEL
595 QUADTRAC
645 QUADTRAC
715 QUADTRAC
785 QUADTRAC
POWER
Tier 4 B/Final - Stage V with TST two-stage turbocharger
Engine Type
Engine HP1
645
715
595
785
Maximum Engine HP 2
699
778
656
853
PTO HP 3
537
Cylinders / Valves / Displacement
6 cyl./24/13L (787 cu. in.)
6-cyl. / 24 / 16L (970 cu. in.)
ELECTRICAL
Alternator / Battery / Battery Isolator
12V 240 amp standard (12V 330 amp optional)/three 950 cranking amps/Yes
TRANSMISSION / PTO
Standard
PowerDrive full-powershift 16F/2R with 16 Hi (25 mph/40 kph or 26.5 mph/42.6 kph with HDS)
PowerDrive full-powershift 16F/2R with 16 Hi (26.5 mph/42.6 kph )
Optional
N/A
PTO Speed
1,000 rpm
AXLES
Axle Diameter
Flanged
Axle Width
88 in. (2 235 mm)
154 in. (3 912 mm)
Wheelbase
HYDRAULICS / HITCH
Rear Remotes (Standard/Optional)
4/up to 8
Hydraulic Pump - PowerDrive (Standard)
57 gpm (216 L/min)
Hydraulic Pump - CVXDrive (Standard)
N/A
Total Tractor Hydraulic Flow with Parallel/TwinFlow Pumps
113 gpm (428 L/min)
Available Flow at Single Remote Valve
35 gpm (132 L/min) - 1/2 in. couplers; 45 gpm (170 L/min) - 3/4 in. couplers
Three-Point Hitch Category
Cat. 4N*
22,250 lb. (10 092 kg)
Hitch Lift Capacity
CAPACITIES
Fuel Tank
470 gal. (1 779 L)
520 gal. (1 968 L)
Diesel Exhaust Fluid Tank
85 gal. (322 L)
DIMENSIONS & WEIGHTS
Drawbar (Standard / Option 1 / Option 2)
Cat. 4: 6,000 lb. ( 2 722 kg)/Cat. 4: 11,000 lb. (4 990 kg)/Cat. 5: 15,000 lb. (6 804 kg)
Cat 5: 15,000 lb. (6 804 kg)
Base/Max. Gross Undercarriage
56,800 lb. (25 764 kg)/standard undercarriage: 67,000 lb. (30 390 kg); HDS: 70,000 lb. (31 751 kg)
61,200 lb. (27 760 kg)/72,000 lb. (32 659 kg)
1Rated 2,100 engine rpm ISO per ECE R120 (CV) 21,900 engine rpm ISO per ECE R120 (CV) 31,000 PTO rpm ISO per ECE R120 (CV) –Power boost available during mobile PTO/hydraulics/transport operation * convertible to Cat. 3
SAFETY NEVER HURTS!™ Always read the Operators Manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs, and use any safety features provided. CNH Industrial America LLC reserves the right to make improvements in design and changes in speci cations at any time without notice and without incurring any obligation to install them on units previously sold. Speci cations, descriptions and illustrative material herein are as accurate as known at time of publication, but are subject to change without notice. Availability of some models and equipment builds varies according to the country in which the equipment is used.
©2025 CNH Industrial America LLC. All rights reserved. Case IH is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or af liates. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH Industrial America LLC, are the property of those respective companies.
Printed in U.S.A. www.caseih.com
CIH25050502
24
Made with FlippingBook - professional solution for displaying marketing and sales documents online