MODEL
325
355
355 ROWTRAC
385
385 ROWTRAC
405
405 ROWTRAC
ENGINE Engine Type Engine HP **
Tier 4 B/Final with Selective Catalytic Reduction (SCR)
325 356 383 277
355 390 410 303
385 417 435 320
405 435 435 352
Maximum Engine HP *
Maximum Boosted Engine HP *
PTO HP †
Cylinders / Valves / Displacement Engine Aspiration / Compression Brake
6 cyl. / 24 valves / 8.7 L
Turbocharger eVGT / Standard
ELECTRICAL Alternator / Battery
240 amp / 2 12-volt batteries
TRANSMISSION/ PTO PowerDrive: 18 Speed (Standard / Optional) PowerDrive: 19 Speed (Standard / Optional) PowerDrive: 19 Speed (Standard / Optional) PowerDrive: 21 Speed (Standard / Optional) PowerDrive: 21 Speed (Standard / Optional)
N/A / 25 mph (40kph) 25 mph (40kph)/ N/A N/A / 30 mph (50 kph)
25 mph (40kph) / N/A
N/A
NA NA
N/A N/A
25 mph (40kph) / N/A
N/A / 30 mph (50 kph)
N/A
CVXDrive Standard / Optional) CVXDrive (Standard / Optional) Rear PTO (Standard / Optional)
N/A / 25 mph (40kph)
25 mph (40kph) / N/A
N/A N/A
N/A / 30 mph (50 kph)
N/A
N/A / 30 mph (50 kph)
N/A
1,000 rpm 1-3/4 in. dia. / 3 interchangeable shafts: 540 and 1,000 rpm 1-3/8 in. dia. and 1,000 rpm 1-3/4 in. dia.
AXLES Rear Axle Diameter (Standard / Optional) Rear Axle Length (Standard / Optional)
4.5 in. (115 mm) / N/A 120 in. (3050 mm) / N/A
N/A N/A
5 in. (127 mm) / N/A
N/A N/A
5 in. (127 mm) / N/A
N/A N/A
120 in. (3050 mm) / N/A
120 in. (3050 mm) / N/A
Suspended Front Axle MFD Tread Adjustability
Optional
60 – 88 in. (1524 – 2235 mm)
MFD Duals
Optional
Wheelbase (PowerDrive / CVXDrive)
120 in. (3050 mm) / 122 in. (3100 mm)
124 in. (3150 mm)
NA / 124 in. (3150 mm)
124 in. (3150 mm) / NA
HYDRAULICS / HITCH System Type
Pressure Flow Compensating (PFC) 5 electrohydraulic / 6 electrohydraulic
Remotes (Standard / Optional)
Hydraulic Pump (Standard / Optional) Rear 3-point Hitch (Standard / Optional)
44 gpm (166 L/min.) / 59 gpm (225 L/min.) or 75 gpm (282 L/min.)
Cat III/IIIN / Cat IV/III 15,900 lb. (7210 kg)
Cat IV/III / NA
Standard Hitch Lift Capacity
17,500 lb. (7940 kg)
19,900 lb. (9026 kg)
19,900 lb. (9026 kg)
Optional Front 3-point Hitch Lift Capacity
9,426 lb. (4275 kg)
Front Hitch PTO Speed
1,000 rpm
PTO Shaft Size
1 3/8 in. (35 mm) shaft 21 spline / 1-3/8 in. dia. 6 spline and 1-3/4 in. dia. 20 spline available from parts
CAPACITIES Fuel Tank / Diesel Exhaust Fluid (DEF) Tank
PowerDrive: 179 gal. (678 L) : CVXDrive: 163 gal. (617 L) / 26 gal. (99 L)
CAB Cab Suspension
Standard
109.5 cu ft. (3.1 m 3 ) / 68.5 sq. ft. (XX m 2 ) / 67 dBa
Volume / Glass / Sound Level WEIGHT Average Standard Weight
28,800 lb. (13082 kg)
29,600 lb. (13458 kg)
36,000 lb. (16329 kg)
32,200 lb. (14148 kg)
36,000 lb. (16329)
32,200 lb. (14148 kg)
36,000 lb. (16329 kg)
* Rated 1,800 engine rpm ISO per ECE R120 (CV)
** 2,100 engine rpm ISO per ECE R120 (CV)
† 2,000 engine rpm ISO per ECE R120 (CV)
SAFETY NEVER HURTS! ™ Always read the Operators Manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs, and use any safety features provided. CNH Industrial America LLC reserves the right to make improvements in design and changes in specifications at any time without notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions and illustrative material herein are as accurate as known at time of publication, but are subject to change without notice. Availability of some models and equipment builds varies according to the country in which the equipment is used.
©2024 CNH Industrial America LLC. All rights reserved. Case IH is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH Industrial America LLC, are the property of those respective companies. Printed in U.S.A. www.caseih.com CIH24081402
Made with FlippingBook - professional solution for displaying marketing and sales documents online