DURABILITY & LOW MAINTENANCE FOR ANY FIELD
Choose cushion or rigid gang bearings to properly support the gang for strength, maximum uptime and productivity.
GANG BEARINGS
• The cushion gang bearing is a heavy duty, greaseable bearing in a trunnion and is commonly used in fields with rocks and debris. It holds the arbor bolt firm while allowing the joint to rotate freely through rough terrain for a high quality seedbed and finish. • The rigid gang bearing option performs well in fields with very few rocks and debris and is a cost-effective choice.
NODULAR CAST IRON SPOOLS
• True-Tandem spools are made of nodular cast iron, which is stronger than the gray cast iron or steel fabricated spools used on other disk harrows. • The 4 1/2-inch (345 mm) or 6-inch (375 mm) diameter spools withstand shock loads caused by field impacts and provide “built-in” weight necessary to cut residue and penetrate hard soil. • No additional weight kits required.
GANG BEARING MOUNT
• Large rigid arm scrapers keep the blades clean during operation. • The scrapers are mounted on a single adjusting bar so all scrapers in a gang may be adjusted at the same time or adjusted individually to make sure the toe of the scraper touches the blade first.
14
Made with FlippingBook - professional solution for displaying marketing and sales documents online