S9074-AR-GIB-010/278
(e) Fit-up. (f). Welding procedure identification. (g) Heat treatments (including preheat, interpass, and post-weld heat
treatment temperatures). (h) Welder identification. (i) NDT methods and results. (j) Disposition of welds. (k) Cycles of repairs to weld. (l) Inspection procedures. (m) NDT personnel identification. NOTES:
1. See sections 10 and 13 for inspection and record requirements for base material weld repairs. 2. For the weld classes 11sted above, a signed inspection record is required for each weld or weld repair in S-51, S-52, and S-53 base metals. The record shall include the following additional information: a. Verifications that the weld joint was cleaned before welding and that inert shielding and purge gas of the required dew point was used. b. Identification of the welders for each pass. Results of the in process inspection of 7.10.2 and the responsible welder's (or inspector's) signature and date. c. Identification of any pass that failed the visual inspection and how that pass was repaired. d. Postweld heat parameters. 1f applicable. 4.1.3.1 Record form. A record form shall be prepared prior to the commencement of the operation which it covers. Operations shall be recorded prior to the commencement of the next operation. Items (1). (1). (1), and (m) of 4.1.3 shall be signed or stamped by the activity's qualified NDT personnel and dated except that 5X magnification visual inspections of weld root layers may be performed by qualified production personnel. All other items shall be signed and dated by production personnel or inspection personnel. When a specific item on the record form is not applicable, the letters "N.A." (Not Applicable) shall be entered. Final acceptance of a weldment shall not be permitted until all items on the record formats are marked as specified above." 4.1.3.2 Maintenance of records. Unless otherwise specified, all required records shall be maintained by the activity and be available to NAVSEA or 1ts authorized representative throughout the life of the contract and for 3 years after delivery. At the expiration of the record retention period. NAVSEA or its authorized representatives shall be given a written notification. Disposition of records shall be as agreed upon by NAVSEA and the contractor.
Original 22
Made with FlippingBook - Share PDF online