S9074-AR-GIB-010/278 TABLE II. Groupings of filler materials (welding)
GROUP
APPLICABLE DOCUMENT
FILLER MATERIAL TYPE 5/
Nickel base alloys (covered electrode)
MIL-1N12
MIL-3N12
A-43A
MIL-E-22200/3
MIL-4N12
MIL-4N1A
MIL-8N12
Nickel base alloys (bare electrode, rod and inserts)
MIL-EN62
MIL-RN62
MIL-EN82
MIL-RN82
MIL-E-21562
MIL-EN6A
A-43B
MIL-RN6A
MIL-EN625
MIL-RN625
MIL-62
MIL-I-23413
MIL-82
Nickel-cobalt alloys (covered electrodes)
MIL-3N1B
MIL-3N1C
A-44A
MIL-E-22200/3
MIL-4N1W
MIL-3N1W
MIL-3N1L
Nickel-Molybdenum-Chromium Alloy (covered electrodes)
A-45A
AWS A5.11
ENiCrMo-4 (UNS-W80276) 8/
Nickel-Molybdenum-Chromium Alloy (bare electrode and rod)
A-45B
AWS A5.14
ERNiCrMo-4 (UNS-N10276) 9/
Titanium-unalloyed (bare electrode)
ERTi-1
A-51B
ERTi-2
AWS A5.16
ERTi-3
ERTi-7
Titanium base alloys (bare electrode)
A-53B
ERTi-5
AWS A5.16
ERTi-5ELI
1/ If filler material of similar chemistry and mechanical properties is not listed under an A-group, it may be considered as a part of a group upon arrival. 2/ To be also used for welding ordinary strength steel to HY-80 steel. 3/ To be used with neutral flux. Original 46
Made with FlippingBook - Share PDF online