TBA - NAVSEA TECHNICAL PUBLICATION

S9074-AR-GIB-010/278

Footnotes to table XVII

ASTM E 272 and E 186 reference radiographs (films) shall be applied as specified. Reference films in ASTM E 272 are identified by tk thickness ranges: (a) up to 2 inches and (b) 2 to 6 inches. Film are shown for the various discontinuity types in both thickness ranges. Three types of shrinkage are shown. designated (a) Feathery. (b) Spongy and (c) Linear. Only feathery type is shown in the up to 2-inch thickness range. and spongy and linear types are shown in the 2-inch to 6-inch thickness range. Films from both thickness ranges have been used without regard to applicable thickness specified herein in order to provide the best coverage and gradation of discontinuities. Since film identification designations are duplicated in the two thickness ranges. they are further identified in the table by stating the source. Where 'X-Ray' appears under source in the table. this indicates that the 'Low Voltage X-Ray Film' is applicable. Where 'gamma' appears under source in the table, this indicates that the '2 MEV X- Ray or Cobalt-60 Gamma Ray Film' is applicable. Reference films specified shall be used for all production radiography sources. 1.

TABLE XX. RT acceatance criteria for tin-bronze castlna~.

Severity level

Criticality level

ASTM E 186 (EXCEPT AS NOTED)

ASTM E 310

Shrinkage

Inclusions

Chaplets

Porosity

Thickness Level

Level Definitions

Reference Radiograph

Reference Radiograph

Reference Radiograph

Reference Radiograph

ASTM Standard

Type

Areas requirng 75 percent and > RT coverage (see 12.5.3) Areas requiring 50 percent min. RT coverage ( see 12.5.3)

Linear

Ca 2

1

B1

None acceptable

A 2

Feathery or Spongy

Ca 1

1/2 Inch and less

Linear

Ca 3

None acceptable

2

2/ B3

A 3

Feathery or Spongy

Cd 2

Areas not requring RT but inadvertenly radiographed or radiographed for information purposes

Ca 4

Linear

3

A 4

B2. 2/ B4

E 186

EA 3

Feathery or Spongy

Cd 3

Linear

Ca 3

Same as level 1 as defined above

2/ B3

None acceptable

A 3

1

Feathery or Spongy

Cd 3

Over 1/2 inch

Ca 4

Linear

Same as level 1 as defined above

A 4

B2 2/ B4

2

E 186

EA 3

Feathery or Spongy

Cd 3

Linear

Same as level 2 as defined above

Ca 5

EA 4

A 5

B5

E 186

3

Feathery or Spongy

Cd 4

Original 117

Made with FlippingBook - Share PDF online