S9074-AR-GIB-010/278
Record of material weldability test when required by the applicable material specification. Records shall be retained as required by 13.2.10.1. (d) (e)
13.2.10.1 Maintenance Record. Unless othenrise specified. required records shall be maintained by the activity and be available to the NAVSEA representative throughout the life of the contract and for 3 years after delivery. At the expiration of the record retention period, NAVSEA or Its authorized representatives shall be given a written notification. Disposal of records shall be as- agreed upon by NAVSEA and the contractor. 13.2.11 Repair welding on existing shipboard castings. Repair welds made on existing shipboard castings shall be inspected by the MT or PT method, as specified in 13.2.8.2. RT shall also be perfomed when repair welding is located in an area for which radiography was specified for the casting in new condition, except radiography is not required where the following provisions are met:
(a)
Weld overlay is used to restore surface material .lost through corrosion, erosion. and wear.
(b)
Depth of area prepared for welding does not exceed the allowable depth of a nominal repair (see 13.2.3). Finished weld thickness is 3/8 inch or less.
(c)
Where the provisions of (a). (b) . and (c) apply to castings of S-1 material. post weld stress relief is not required. For repair welding on nickel -alminun-bronze see the special note to 13.2.5.
Original 126
Made with FlippingBook - Share PDF online