S9074-AQ-GIB-010/248 Rev 1
CHAPTER 2 REFERENCED DOCUMENTS
2-1 GOVERNMENT DOCUMENTS. 2-1.1 SPECIFICATIONS AND STANDARDS. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
O-F-499
- Flux Brazing, (Silver Brazing Filler Metal, Low Melting Point)
QQ-B-639 - Brass, Naval: Flat Products
QQ-B-654 - Brazing Alloys, Silver
QQ-C-450 - Copper-Aluminum Alloy (Aluminum Bronze) Plate, Sheet, Strip, and Bar (Copper Alloy Numbers 606, 610, 613, 614, and 630) QQ-N-281 - Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-T-1368
- Tube and Pipe, Nickel-Copper Alloy, Seamless and Welded
MIL-T-15005
- Tubes, Condenser and Heat Exchanger, Copper-Nickel Alloys (UNS C70600 & C71500)
MIL-B-15382
- Bolt, Firebrick Anchor
MIL-C-15726
- Copper-Nickel Alloy, Sheet, Plate, Strip, Bar, Rod, and Wire
MIL-T-16286
- Tube, Steel, Seamless, Marine Boiler Application
MIL-T-16420
- Tube, Copper-Nickel Alloy, Seamless and Welded (Copper Alloy Numbers 715 and 706)
MIL-R-17131
- Rods and Powders, Welding, Surfacing
MIL-E-19933
- Electrodes and Rods – Welding, Bare, Chromium and Chromium-Nickel Steels
MIL-T-20219
- Tube, Brass, Voice and Pneumatic (Copper Alloy No. 260)
MIL-E-21562
- Electrodes and Rods – Welding, Bare, Nickel Alloy
MIL-E-22200
- Electrodes, Welding, Covered; General Specification for
MIL-DTL-22200/1 - Electrodes, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen Medium and High Tensile Steel, As Welded or Stress-Relieved Weld Application
MIL-E-22200/2
- Electrodes, Welding, Covered (Austenitic Chromium-Nickel Steel)
MIL-E-22200/3
- Electrodes, Welding, Covered: Nickel Base Alloy, and Cobalt Base Alloy
MIL-E-22200/4
- Electrodes, Welding, Covered, Copper-Nickel Alloy
MIL-E-22200/5
- Electrodes, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen, Low-Alloy Steel for Hardening and Tempering Heat Treatment Applications Only
2-1
Made with FlippingBook - Share PDF online