S9074-AQ-GIB-010/248 Rev 1
ASTM A659/A659M
- Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
ASTM A660/A660M
- Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
ASTM A662/A662M
- Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service - Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar - Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures - Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
ASTM A666
ASTM A671/A671M
ASTM A672/A672M
ASTM A709/A709M
- Standard Specification for Structural Steel for Bridges
ASTM A727/A727M
- Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness - Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application - Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service - Ferritic and Martensitic Steel Castings for Pressure-Containing and Other Applications for Low-Temperature Service - Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
ASTM A743/A743M
ASTM A744/A744M
ASTM A757/A757M
ASTM A765/A765M
ASTM A793
- Standard Specification for Rolled Floor Plate, Stainless Steel
ASTM A794/A794M
- Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
ASTM A813/A813M
- Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe - Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements - Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness - Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable - Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength - Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines
ASTM A830/A830M
ASTM A945/A945M
ASTM A1008/A1008M
ASTM A1011/A1011M
ASTM B16/B16M
2-9
Made with FlippingBook - Share PDF online