S9074-AQ-GIB-010/248 Rev 1
Table 7-3. Grouping of Base/Filler Materials for Welding Procedure Cross-Qualification 1/, 2/, 6/ - Continued
Base Material 3/
Filler Material 10/
Qualified for Categories 4/
Category
A
B
Ferritic materials/flux-cored arc process (continued)
21/ A-5D (MIL-101TC or MIL-101TM only)
3
S-11A S-11C S-11D S-11A S-11C S-11D
S-11A (HY-80) S-11C
3 through 6, and 11
9/ A-5D; or A-2D or 3D electrodes specifically permitted by NAVSEA T9074-AD-GIB-010/1688 or MIL-STD-1689
4
S-2 S-1
4, 5, 6, and 11
9/ A-2D or A-3D
5
S-2
S-2
5, 6, and 11
9/ A-2D or A-3D
6
S-2
S-1
6 and 11
7
S-3A
S-3A
A-3D
7 through 11
9/ A-2D or A-3D
8
S-3A
S-3 S-1
8 through 11
9/ A-2D or A-3D
9
S-3
S-3
9 through 11
9/ A-2D or A-3D
10
S-3
S-1
10 and 11
11
S-1
S-1
A-2D
11
Hardfacing and corrosion resistant cladding, all processes
For cladding, 1, 2, and 5. For hardfacing, 1 only. The same filler material type shall be used in all cases except the table 7-2 filler material A group allowances of 4-7 are permitted. For cladding, 1, 2, and 5. For hardfacing, 2 only. The same filler material type shall be used in all cases except the table 7-2 filler material A group allowances of 4-7 are permitted. 3 and 5. The same filler material type shall be used in all cases except the table 7-2 filler material A group allowances of 4-7 are permitted.
1
S-11A S-11B
--
Filler material type involved
2
S-11C S-11D
--
Filler material type involved
S-5 12/ S-4
3
--
Filler material type involved
See footnotes at end of table.
7-32
Made with FlippingBook - Share PDF online