S9074-AQ-GIB-010/248 Rev 1
Table 7-3. Grouping of Base/Filler Materials for Welding Procedure Cross-Qualification 1/, 2/, 6/ - Continued
Base Material 3/
Filler Material 10/
Qualified for Categories 4/
Category
A
B
Hardfacing and corrosion resistant cladding, all processes (continued)
S-3/3A 12/
4 and 5. The same filler material type shall be used in all cases except the table 7-2 filler material A group allowances of 4-7 are permitted. For cladding, 5, 1, and 2. For hardfacing, 5 only. The same filler material type shall be used in all cases except the table 7-2 filler material A group allowances of 4-7 are permitted.
4
--
Filler material type involved
5
S-1 S-2
--
Filler material type involved
Austenitic stainless steel to ferritic materials/shielded metal arc
A-8A (MIL-309 or MIL-309L or MIL-309Cb or MIL-310 types only)
1
S-8
S-11B S-11A S-11D S-11C S-5 12/ S-4
1 and 4
A-8A (MIL-309 or MIL-309L or MIL-309Cb or MIL-310 types only) A-8A (MIL-309 or MIL-309L or MIL-309Cb or MIL-310 types only) A-8A (MIL-309 or MIL-309L or MIL-309Cb or MIL-310 types only)
2
S-8
2 and 4
S-3/3A 12/
3
S-8
3 and 4
4
S-8
S-2 S-1
4 and 1
5
S-8
S-11B S-11A S-11D S-11C S-5 12/ S-4
A-43A (MIL-1N12 or MIL-8N12/8N12H only)
5 and 8
6
S-8
A-43A (MIL-8N12/8N12H only)
6 and 8
S-3/3A 12/
7
S-8
A-43A (MIL-8N12/8N12H only)
7 and 8
8
S-8
S-2 S-1
A-43A (MIL-8N12/8N12H only)
8 and 5
Austenitic stainless steel to ferritic materials/gas tungsten arc, gas metal arc, and plasma arc
1
S-8
S-11B S-11A S-11D S-11C S-5 12/ S-4
A-8B (MIL-309 or ER-309L or MIL-310 types only) 1 and 4
2
S-8
A-8B (MIL-309 or ER-309L or MIL-310 types only) 2 and 4
See footnotes at end of table.
7-33
Made with FlippingBook - Share PDF online