S9074-AQ-GIB-010/248 Rev 1
Table 7-5. Essential Elements of a Welding Procedure 12/
Arc Welding 1/
Fuel Gas Welding
Robotic, Automatic, and Mechanized 3/
Manual
Semi-Automatic
Base material 5/, 7/ Specification and type or class or chemical analysis, thickness, and condition; application per 4-3.1.1 Filler material Specification and type, diameter and form (wire, strip, powder, insert)
X
X
X
X
X
X
X
X
For fillet welding over primer, the primer manufacturer, manufacturer’s designation, and maximum thickness
Flux Specification, size, type
--
X
X
X
Base material cleaning
X
X
X
X
Applicable joint designs (reference or sketches)
X
X
X
X
8/
Process
X
X
X
X
Arc-metal transfer mode 10/
--
X
X
--
Machine, model or type for welding power supply and, as applicable, wire feeder and, for SAW, weld head Electrical characteristics 6/, 11/ current, arc voltage range, polarity
X (where 1/ (b) or 11/ apply)
X
X
--
X 2/
X
X
--
-- 6/
-- 6/
Travel speed
X
--
Position (including progression vertical-up or -down)
X
X
X
X
X 4/
Torch make and model
X
X
X (torch tip size only)
X 4/
Torch shielding gases Type and flow rates Purge gases Type and flow rates
X
X
--
X
X
X
--
Postheat treatments, holding times, and temperatures Preheat and interpass temperature limits Deposition method (weave vs stringer) and max. bead width Oscillation (see 3-2.11) (amplitude, and frequency and dwell)
X
X
X
X
X
X
X
X
X 9/
X 9/
--
--
X 9/
X 9/
X
--
See footnotes at end of table.
7-43
Made with FlippingBook - Share PDF online