S9074-AQ-GIB-010/248 Rev 1
Table 7-12. Material Combinations and Brazing Alloy Requirements 4/
Material (P-no.)
Material (P-no.)
P-101 2/
P-102 3/
P-107 2/
P-108 1/
P-110 2/
P-111 3/
P-101 2/, 5/
F-101
F-102
F-101
F-101
F-101
F-101
P-102 3/, 5/
F-102
F-102
F-102
F-102
F-102
F-102
P-107 2/, 5/
F-101
F-102
F-101 or F-103
F-101 or F-103
F-101
F-101
P-108 1/, 5/
F-101
F-102
F-101 or F-103
F-101 or F-103
F-101
F-101
P-110 2/, 5/
F-101
F-102
F-101
F-101
F-101
F-101
P-111 3/, 5/
F-101
F-102
F-101
F-101
F-101
F-101
NOTES:
1/ Aluminum bronze materials require special aluminum bronze brazing flux as specified in O-F-499, type A (Handy and Harman Special Flux Type A-1, or equal). 2/ Flux shall conform to type A or B or equivalent of O-F-499. 3/ Grade V alloy or another alloy containing 2 percent or more nickel shall be used for any brazed joint where one or both of the metals joined is stainless steel (see table 7-14, footnote 5). 4/ F-103 brazing alloys shall not be used on ferrous alloys, nickel base alloys, copper-nickel alloys containing more than 10% nickel, or stainless steel (see table 7-14, footnote 4). 5/ Where F-101 is listed, F-101A is included. Where F-102 is listed, F-102A is included.
7-59
Made with FlippingBook - Share PDF online