S9074-AQ-GIB-010/248 Rev 1
BEND THIS WAY TO FRACTURE
T
WEB
S
3" MIN
FLANGE
T
18" MIN
4" MIN
T = MAXIMUM THICKNESS TO BE USED IN PRODUCTION OR 3/8 INCH, WHICHEVER IS THE LESSER. S = MAXIMUM SIZE SINGLE PASS FILLET TO BE USED IN PRODUCTION.
NOTES: 1. Positions qualified shall be in accordance with table 7-4. 2. Test assembly may be cut into shorter lengths after welding to facilitate testing.
Figure 7-8. Procedure Qualification Test Assembly for Fillet Welding Bare Surfaces
7-82
Made with FlippingBook - Share PDF online