S9074-AQ-GIB-010/248 Rev 1
T
S
3" MIN
T
18" MIN
4" MIN
T = MAXIMUM THICKNESS TO BE USED IN PRODUCTION OR 3/8 INCH, WHICHEVER IS THE LESSER. S = MAXIMUM SIZE SINGLE PASS FILLET TO BE USED IN PRODUCTION.
NOTES: 1. Plating shall be either ordinary or higher strength steel, as specified in MIL-S-22698, which qualifies the procedure for use on these materials. 2. Plating shall be primer-coated to maximize thickness that will be applied in production. 3. Plate shall be welded in the horizontal position and shall qualify for all positions. 4. Remove first side weld by gouging or mechanical means and fracture second side weld. Test assembly may be cut into shorter lengths after welding to facilitate fracturing for examination.
Figure 7-9. Procedure Qualification Test Assembly for Fillet Welding Over Primer-Coated Surfaces
7-83
Made with FlippingBook - Share PDF online