S9074-AQ-GIB-010/248 Rev 1
Test Report No., Rev.: ______________________________________
Nondestructive Test Acceptance Criteria & Results: RT: ____________ UT: ____________ MT: ____________ PT: ____________ VT 6/ : ___________________________________ Acceptance Criteria & Standard: _____________________________________________________________________________ Other: __________________________________________________________________________________________________ Tensile Test (* = optional)
Specimen No. & Type (Tr., AWM)
Type of Failure & Location*
Thickness*
UTS
YS (AWM)
%EI (AWM)
Bend Tests (R = Roof, F = Face, S = Side)
Bend Type (R, F, S)
Specimen No. & Type (Long., Tr.)
Thickness, if not 3/8 in.
Bend Radius
Results
Toughness Test Type/Units 8/ : _____________________: * - MLE, % Shear, Validity, if applicable
Specimen No. (Weld)
Results/ Temp. 9/
Specimen No. (HAZ)
Results/ Temp. 9/
Specimen No. (BM)
Results/ Temp. 9/
Other*
Other*
Other*
Average: Average: Macros: Criteria: ______________________________________________ Specimen No./Results: _________________________ ________________________________________________________________________________________________________ Fillet Break: Criteria: ____________________________ Fracture Surface: ________________ Root Fusion: _________________ Other: __________________________________________________________________________________________________ 1/ Any of the form items not applicable should be so indicated by “N/A”. 2/ List required pulsing parameters on attached sheet. Average:
6/ For titanium, also list weld color (ID/OD); for thin socket/ seal welds, list ID criteria. 7/ For mechanized, etc., list oscillation (amplitude, dwell, etc.) if used. 8/ List test type (e.g., CVN, DT, J IC , NDTT, etc.) and test result units (e.g., ft.-lbs.). 9/ List test temp in ° F and test value.
3/ In processes where amperage controls, arc voltages will be recorded for info only; where voltage controls, amperage will be recorded for info only. 4/ Attach values for each pass. 5/ List weld thickness and layers where composition or hardness test is performed.
Performing Activity Certification Statement & Signature Performing Activity: ________________________________________ The statements in this record are correct and the test welds were prepared, welded, and tested in accordance with NAVSEA S9074-AQ-GIB-010/248 Rev. ___________________. Name (Print): _________________________________ Signature: ________________________________ Date: _____________ Page 2 of _____
Figure 7-11. Sample for Reporting Welding Procedure Qualification Data - Continued
7-86
Made with FlippingBook - Share PDF online