S9074-AQ-GIB-010/248 Rev 1
Repaired friction stirred area (if applicable) FS welded or friction stir processed region
Discard
Transverse tensile
Wrap around root
Macro Wrap around face
Discard
t
12 inches esmin
NOTES: 1. Test assembly size shall be as specified by A-3.4.1.2 for FSW, A-3.4.2.2 for FSP, and A-3.4.3.2 for repairs. 2. Test assembly fabrication shall be as stated in A-3.4.1.3 for FSW, A-3.4.2.3 for FSP, and A-3.4.3.3 for repairs. 3. Exit hole repair procedures only require one macro-etch specimen taken transverse to the weld at the center of the exit hole. 4. The discard length recorded in the qualification test report does not need to be evaluated by NDT.
Figure A-3. Schematic of Test No. 2 for Level II FS Procedure Qualification Test Assembly
A-22
Made with FlippingBook - Share PDF online