S9074-AQ-GIB-010/248 Rev 1
FS welded or FS processed region
Repaired friction stirred area (if applicable)
Discard
Transverse tensile
Wrap around root
Macro Wrap around face
Discard
t
12 inches min
NOTES: 1. All NDT shall be completed prior to destructive testing. All required test specimen preparation, dimensions, and mechanical testing shall be per A-3.5. 2. Test assembly size shall be as specified by A-3.4.1.2 for FSW, A-3.4.2.2 for FSP, and A-3.4.3.2 for repairs. 3. Test assembly fabrication shall involve the base material form to be qualified (see A-4.6.1) and may be of any alloy, temper and thickness specified in the qualified FS procedure being used. See A-3.4.1 for other fabrication details. 4. Exit hole repair procedure only requires one macro-etch specimen taken transverse to the FS pass at the center of the exit hole. 5. The discard length recorded in the qualification test report does not need to be evaluated by NDT.
Figure A-6. Schematic of Test No. 3 for Performance Qualification
A-25
Made with FlippingBook - Share PDF online