Distribution grid overhead/underground interactive guide.
— Distribution grid overhead/underground
— Click product to learn more:
Reclosers
Fault circuit indicators
Capacitor switches
Current limiting fuses
Sectionalizers
Cable accessories
Cutouts
Distribution connectors
MV solid dielectric switchgear
Outdoor switches
Instrument transformers and sensors
Outdoor vacuum circuit breakers
— Reclosers
Reclosers are predominantly located on the distribution feeder, though as the continuous and interrupting current ratings increase, they are seen in substations, where traditionally a circuit breaker would be located. Reclosers have two basic functions on the distribution
LEARN MORE
system: reliability and overcurrent protection.
LEARN MORE
— Capacitor switches
Joslyn Hi-Voltage® capacitor switches are designed to switch capacitor banks for improved system efficiency, voltage profile and capacity. Fisher Pierce® controllers help to optimize the grid power performance and power factor correction. They can be used in conjunction with Joslyn Hi- Voltage VerSaVac® and Varmaster VBM capacitor switches.
LEARN MORE
The ABB AutoLink sectionalizer is an isolating device that automatically isolates the faulted section of the overhead network when a permanent fault occurs. If a temporary fault occurs, the AutoLink allows the upstream recloser or breaker to clear the fault without interrupting the circuit. Both AutoLink electronic sectionalizer and the wireless version of Autolink, WiAutoLink, are designed to improve reliability and service continuity. — Sectionalizers
LEARN MORE
— Cutouts
ABB has a long history of providing safe, reliable over- current protection for distribution systems with interchangeable and non- interchangeable cutouts and fused cutout that also perform as outdoor load break switches. We design fused cutouts with porcelain, silicone rubber, or polymer concrete insulators. Polymer concrete and silicone rubber cutouts can perform in stressful environments, including extreme cold, heat, by the sea and in heavy pollution.
LEARN MORE
— Outdoor switches
Used for sectionalizing or isolating equipment on distribution systems, 15 kV – 38 kV, 600 or 900 A continuous loads with a 40 kA momentary rating.
LEARN MORE
— Instrument transformers and sensors
ABB manufactures medium voltage
instrument transformers according to ANSI, IEC, GOST, GB, BS, and DIN standards.
LEARN MORE
— Fault circuit indicators
Fault circuit indicators reduce outage duration by quickly pinpointing the location of faults. Fisher Pierce® has a line of cable-mount and test-point mounted faulted circuit indicators, voltage indicators and phase indicators. Fisher Pierce has the right fault-indication
solution to meet your system’s performance needs.
LEARN MORE
— Current limiting fuses
Hi-Tech® is an industry brand of current-limiting fuses with advanced designs to provide superior protection in small, cost- efficient form factors to optimize value, reliability and reduce system lifecycle costs. With fault-clearing capabilities in less than one-half cycle, Hi-Tech current limiting fuses reduce the let-through energy, significantly reducing equipment stress and increasing safety.
LEARN MORE
— Cable accessories
ABB Installation Products power and high voltage products address the constant need for improved electric power efficiency and reliability with continuous reductions in installation,
maintenance, and operating costs.
LEARN MORE
— Distribution connectors
Blackburn® stands for quality and reliability as a supplier of materials to connect overhead distribution power lines and equipment. Homac® Substation Connectors encompass a broad line of high-quality substation connectors that are reliable and can help save money and time. We offer prefabricated bus assemblies, A-Frames, and jumpers to help save utilities time and money on a job site.
LEARN MORE
Elastimold molded vacuum switches and interrupters help utilities increase reliability on electrical distribution systems up to 38 kV. All Elastimold switches, interrupters and switchgear are assembled in and shipped from Hackettstown, New Jersey, USA, and can be equipped with the Elastimold Tru-Break switchgear module for added crew safety. — MV solid dielectric switchgear
LEARN MORE
— Outdoor vacuum circuit breakers
R-MAG outdoor breakers are designed with a maintenance-free, magnetically actuated mechanism to provide unparalleled reliability and safety in the field. The streamlined design enables easier integration and reduces training time for new users.
LEARN MORE
— Service
Improving availability, reliability, predictability and sustainability of your assets ABB Electrification Service partners with utilities to manage their energy and electrical infrastructure as strategic operational assets in a safer, smarter, and more sustainable way.
LEARN MORE
— Utility solutions
Safe, smart and sustainable solutions for the North American market
DOWNLOAD LINECARD
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17Made with FlippingBook Ebook Creator