PRODUCT NAME CORDLESS DRILL DRIVER ABS 18 POWER M-CUBE
Electronic Motor Protection
20 Stage Adjustment
Drill Chucks
Brushless Motor
Very powerful, handy cordless drill driver specially designed for hard use on construction sites with a torque of 140 Nm Robust design For demanding use on construction sites, all components will also survive a fall from normal working heights. Continuous monitoring of the motor The electronic motor protection function switches the motor off ahead of time in the event of blockage, overloading or overheating. Long motor service life Efficient, low-maintenance, brushless EC motor with power reserves. Also maintains a more stable speed curve under load. Maximum service life and low wear • 13 mm Röhm metal chuck with soldered carbide clamping jaws
2 Years WÜRTH MASTERPLUS Warranty for wear damage The current WÜRTH MASTERPLUS warranty conditions must be observed. 3 Years Warranty on manufacturing and material defects Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.
Nominal voltage
18 V/DC
Idle speed 1st/2nd gear min./max. Max. torque hard/soft Mni./max. drill chuck span width
0-550/0-2000 rpm
140/60 Nm 1.5-13 mm
Drill chuck holder
1/2 inch x 20 UNF
Max. drilling diameter in steel/ aluminium/metal
13 mm
• Electronic signal switch Well-lit working area LED lamp on the battery block
Max. screw diameter
12 mm
Length/Height
205 mm/260 mm
Weight of machine with rechargeable battery
2.2 kg
Included in delivery
Number of rechargeable batteries
Rechargeable battery capacity
Art. No
Qty.
Batteries not included 0 PCS
0 Ah 5 Ah
5701 404 000 1 5701 404 005 1
With 2 batteries
2 PCS
621
Made with FlippingBook Digital Publishing Software