HITABLÁSARI HLG 2300-E POWER
Handy, lightweight device with continuous temperature and air flow regulation. Additional LCD display with memory function • Frequently used settings can be saved using the LCD display • The temperature is set in 5°C steps and the air flow is adjusted in 5 stages, thus allowing simple temperature and air flow control • Long motor service life of up to 1000 hours • Rugged ceramic heater with low impact sensitivity • Thanks to the lightweight, ergonomic design, even longer work can be carried out with little fatigue 2 Years WÜRTH MASTERPLUS Warranty for wear damage The current WÜRTH MASTERPLUS warranty conditions must be observed. 3 Years Warranty on manufacturing and material defects Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.
Nominal voltage
230 V/AC
Frequency Power input
50 Hz
2300 W
Min./max. blower temperature Min./max. air current Weight of machine
80 to 650 °C
200 - 550 l/min
750 g
Cable length Cable type
5 m
H05RN-F2x1 mm 2
Height Length Width
195 mm 250 mm
75 mm
Article no.
5707 252 1
644
Made with FlippingBook Digital Publishing Software