1. Set the press to 190°C and 90 seconds. Use medium-high pressure. 2. Place the puzzle, white side facing up on the press base.
3. Print your design in reverse image on sublimation paper with sublimation ink and printer. Cut out your image as close as possible to the design/print, this will make lining up easier.
4. With the print facing the white side of the puzzle, line the print up and secure it with heat tape. The heat tape will go from the print to the Teflon sheet and NOT wrap around the puzzle itself.
5. When the temperature is ready, close the press and press for 90 seconds. Remove the print immediately when the time is up on the press.
Made with FlippingBook - professional solution for displaying marketing and sales documents online