200-1145 Pressurized Induction Tool Features: • Helps you perform an effective induction service on direct or conventional fuel injected engines • Chemicals NOT included with tool and must be purchased separately PRESSURIZED INDUCTION TOOL KIT visit www.motorvac.com for more information
MASTER FUEL INJECTION PRESSURE TEST KIT
MASTER GLOBAL FUEL INJECTION PRESSURE TEST KIT Covers all major model platforms, domestic and foreign, 1988 to present. Redesigned fuel line tee accommodates 3/8”,1/4” and 5/16” hose sizes. A longer tee adapter to cut test hoses for easier connections. Molded storage case. Gauge assembly disconnects from test hose and valve assembly for easier storage and improved gauge protection. ATD-5650................... $372.49
60 D
$527.59 ATD-5578
Tests both foreign and domestic fuel injection systems; includes late model GM, Chrysler and European applications; large 3-1/2” gauge with dual reading of 0–145 psi and 0–1000 kPa; allows checking for sufficient fuel flow; low pressure 2-1/2” gauge
$439.95 MOV-200-1145
200-1145
DELUXE VACUUM/ FUEL PUMP TEST KIT
HD GLOBAL DIESEL COMPRESSION TEST SET 2-1/2” easy-to-read gauge; adapters for Cummins, Bedford, Case, Caterpillar ® , John Deere ® , Fiat Allis, Ford Tractor, GMC, Hino Trucks ™ , International and Navistar, Isuzu, Mack, Massey-Ferguson, Mercedes, Mitsubishi-Fuso, Onan, Scania, Volvo, Wisconsin and others. ATD-5682................$439.95 CUMMINS 5.9L DIESEL FUEL SYSTEM TEST KIT All adapters necessary for testing on Cummins Series B and ISB engines (including Dodge Ram). Adapters are individually labeled for easy identification. MTI-TU32................$384.19 FORD POWER STROKE DIESEL FUEL SYSTEM TEST KIT For diesel fuel pressure testing on Ford Power Stroke engines 1994 to present. Includes a 100 psi gauge, a bleed off valve hose assembly, and all the adapters necessary to pressure test the fuel system on Power Stroke engines.
LIGHT TRUCK COMPRESSION KIT Test compression on Dodge Cummins, Ford Power Stroke, GM Duramax and virtually every light duty diesel truck on the market!
2 ft. of high quality hose, (3) fittings to test domestic and foreign cars and trucks with gas engines; hook-on 3-1/2” com- pound gauge has a multi-color dual scale dial with ranges from 0–10 psi, 0–0.7kg/ cm 2 and 0–28inHg/0–70cmHg vacuum
(12) Compression Test Adapters included for the following applications: GM Diesel 4.3L, 5.7L, 6.2L, 6.5L, 6.6L; Cummins/Dodge 5.9L 12V & 24V; Ford/Navistar 7.3L, 6.0L, 6.4L, 6.7L, T444E, VT365; Sprinter/Mercedes 2.7L, 3.0L; VW, Mazda, Nissan-UD, Cat-Perkins, Kubota, Isuzu, Hino, Toyota; other engines utilizing M10 x 1.0, M1- x 1.25, M14 x 1.25, M 12 x 1.25 M8 x 1.0
ATD-5657..................... $37.89
$283.49 ATD-5685
BASIC FUEL INJECTION PRESSURE TESTER
UNIVERSAL COMPRESSION TESTER
Tests most systems except Bosch CIS and GM TBI; 2-1/2” dual scale gauge reads 0–100 psi or 0–7 BAR; includes the necessary adapters, banjo bolts, and 16” gauge hose with quick coupler and adapter guide book
Gas engine compression testing on domestic and foreign vehicles; screw-in adapters with O-rings; incudes 14mm and 18mm short-solid, 14mm and 18mm long-flex and 14mm long-reach adapters; long flex 12” hose and side release valve; 2-1/2” gauge has dual scale dial with ranges from 0–300 psi and 0–21 BAR ATD-5659..................$61.19
ATD-5633................... $185.09
FUEL INJECTION PRESSURE TESTER Tests American Motors, Bosch, AFC, MPC European and Japanese (except CIS); basic fuel injection tester includes large and small Schrader adapters; M6-1.00 O-ring adapter and tee manifold Chrysler, Ford, GM (except TBI); Japanese and Bendix-type systems; 2-1/2” gauge has dual scale with ranges from 0–100 psi and 0–7 BAR
PROFESSIONAL COMPRESSION TEST KIT
TU-32-4PB
ATD-5567..................... $58.29
MTI-TU32-4PB........$349.99
2-3/4” gauge with high impact lens, rubber boot, (4) scales of measure (psi, kg/cm2, BAR, kPa), 10” long hose and quick release coupler; 14mm short-thread adapter with 6-1/2” and 12” hoses; 14mm
FUEL INJECTION CANISTER CLEANER
GM 6.6L DURAMAX DIESEL FUEL SYSTEM TEST KIT For diesel fuel pressure and vacuum testing on GM 6.6L Duramax engines. Gauge assembly with 6 ft. hose and quick coupler. 3-1/2” gauge reads 30 in Hg to 15 psi. MTI-TU32-6.............$234.09 COMPUCHEK TESTER Used to check fuel system pressure on diesel engines with Compuchek test ports. Fits Compuchek test ports on the fuel system of Cummins diesel engines as well as other diesel en- gines that have been outfitted with the Compuchek test ports. Consists of a hose assembly with a female Compuchek fitting on one end and a 3-1/2”, 300 psi gauge on the other.
Centrally mounted chain and S-hook provide better balance during cleaning process; stainless steel braided Teflon ® hose; reduces potential damage by separating the gauges and manifold from the canister during filling; will restore the original spray pattern, giving improved performance, fuel economy and emissions test.
long-thread adapter with 12” hose; 18mm short-thread adapter with 12” hose; 14mm short-thread x 18mm long-thread adapter; 10mm thread small engine adapter; field service kit; quick release air hold adapter; 12mm thread small engine adapter
MIT-MV5530...........$100.69
TU-32-6
COMPRESSION TEST KIT FOR GASOLINE ENGINES
MTI-TU470B............... $273.59
FUEL INJECTION PRESSURE TESTER WITH SCHRADER ADAPTERS Tests all cars with standard or small Schrader valves; 3-1/2” gauge has a dual scale dial with ranges from 0–100 psi and 0–7 BAR; quick coupler connection at end of gauge hose
Use with most standard compression test adapters; easy-to-read pressure gauge has a dual scale dial with ranges from 1–100 psi and 0–7 BAR with a gauge boot for added protection; 2 gauge design allows for monitoring of input air line pressure to ensure accurate testing; uses shop air to determine leakage source CYLINDER LEAKAGE TESTER ATD-5573A..............$111.19 Test all major model vehicle platforms, domestic and foreign with gasoline engines, including mini engines. 2-1/2” gauge has dual scale with ranges from 0-300 psi and 0-21 BAR. Includes 24” hose assembly w/ quick coupler; M14 hose adapter w/ short thread; small engine tester; M14 hose adapter w/ long thread; M12 x M16 hose adapter; M10 adapter w/ short thread; M14 adapter extension ATD-5639................$147.49
MTI-TU32-20...........$184.89
TU-32-20
MTI-TU469................. $157.29
BASIC DIESEL FUEL PRESSURE TEST KIT
3 WAY EXHAUST BACK PRESSURE KIT
Test Kit is used to test fuel pressure between the lift pump and the injection pump on diesel engines, and Can be used to test most diesel engines from single cylinder to V32 models. Includes: 100 PSI gauge assembly with 4-ft. hose, pressure relief valve 6-ft. clear PVC tube, 5 banjo bolt adapters ranging from 8mm to 14mm, 1 repair kit. MTI-TU32-2.............$232.89
• Test oxygen sensor, exhaust pipes and injection system • Gauge has (2) multi-colored bands; idle and 2500 rpm, with pressure shown in psi and BAR • 6 ft. hose MTI-TU24APB............$132.79
TU-32-2
Made with FlippingBook flipbook maker