ProLab Research® Laboratory Tapware Brochure

Burning Gas Low Pressure (Lift-Turn)

Fume Hood Tapware

The ProLab ® range of Lift-Turn gas turrets are suitable for low pressure gas systems and are AGA approved to a maximum pressure of 7kPa. Designed for safety, a user must first lift the handle before turning to activate the turret. This prevents the valve from being accidentally opened. The range of Lift-Turn turrets are manufactured from the highest quality materials. They comply with DIN EN 13792 colour requirements and are finished in white epoxy coating with yellow handles. Please always refer to local regulations when installing products to be used with burning gases.

ProLab ® Fume Hood Tapware and Outlets are available to suit all common laboratory services. Tapware powder coated surface finish provides excellent protection against corrosion, discoloration and surface damage to the control handle and outlet. ProLab ® handles are designed to give precise feedback and fingertip control. Handles are colour coded for easy service identification and use complimentary buttons. The Fume Hood outlets are also colour coded for easier identification with the paired control handle.

Colour coding of taps and valves for laboratories to DIN EN13792

Water

Burning Gas

Potable water, cold

Potable water, hot

Non-potable water,cold

Non-potable water, hot

Natural gas

Liquefied gases propane/ butane

Methane

Propane

Butane

Special Water

Ethene

Propene

Acetylene

Distilled water

Deionised water, cold

Deionised water, hot

Vacuum

Dry Services

Low vacuum Fine vacuum

Nitrogen Compressed air

Oxygen

Argon/methane Hydrogen

Carbon dioxide

Argon

Hellium

Whilst all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remains the property of Galvin Engineering Pty Ltd.

Environment ISO 14001

A business unit of

410 Victoria Rd, Malaga, WA 6090 Within Australia: 1300 514 074 Outside Australia: P: +61 (0)8 9249 5900 F: +61 (0)8 9249 5916

sales@galvinengineering.com.au www.galvinengineering.com.au

PERTH I SYDNEY I MELBOURNE I BRISBANE I ADELAIDE

ABN: 78 008 719 382

Specialised commercial taps and valves

© Galvin Engineering Pty Ltd: 2009 © Galvin Engineering Pty Ltd: 2015

© Galvin Engineering Pty Ltd: 2015 (Issue 1/2015)

Made with FlippingBook - Online catalogs