Omnia Catalog | English

IRRIGATION LINES

OMNIRRIGATOR Manual irrigation system with button-driven flow regulator that enables the assistant to keep the operation field clean and further cool the implant site. The system is also suitable for irrigation during final screwing of the implant by means of a dynamometric key. The tube fitted with the perforating needle to be

inserted into the saline solution bag. The irrigation tube is 200 cm long.

Code

Description

Qty

32.F1007.00

Mechanical Irrigation Lines with push-button flow regulator

5 pcs

ACCESSORIES FOR MANUAL IRRIGATION Used to customize cooling lines according to your own needs. If a special irrigation line with peristaltic pump block is not available, the system can be composed by combining the items listed below.

Code

Description

Qty

32.F0116.00

Vented spike for Hand Fuser with female Luer connector 10 pcs

32.F0016.00

Extension with Luer Lock without vented spike

10 pcs

32.F0116.00

The irrigation system 32.F0157.00 is a semi-manual system, which may be connected to the Hand Fuser system through the vented spike, or it may be directly connected to the contra-angle through a hook-shaped flow adjuster. The practical sliding button, which must be hooked to the handpiece, allows stopping or adjusting flow strength.

Code

Description

Qty

32.F1003.00

Terminal irrigation needle for Omnirrigator, in PVC

50 pcs

Semi-manual irrigation set with sliding flow adjuster for contra-angle

32.F0157.00

10 pcs

60

Made with FlippingBook Annual report