Page 19/
Accessories:
Wet Sand blasters
Code
Description
AKT WETSANDKIT04 AKT WETSANDKIT05 AKT WETSANDKIT085
TS8 Wet sandblaster kit .04 c/w 4m hose & sand probe TS8 Wet sandblaster kit .05 c/w 4m hose & sand probe TS8 Wet sandblaster kit .085 c/w 4m hose & sand probe
Spray pattern: Rated pressure:
Round
250 Bar (3650 psi) 280 Bar (4000 psi)
Permissible pressure: Maximum flow rate:
40 L/min
For stripping rust, paint & coatings from metal surfaces. Can also be used on concrete with care. Always use a full face shield and protective clothing when Wet sandblasting.
Code
Description
25.0450.00
TS12 Industrial Sandblaster Head 500 Bar
Spray pattern: Rated pressure:
Flat 15 Degree fan 500 Bar (7250 psi) 560 Bar (8100 psi)
Permissible pressure: Maximum flow rate:
80 L/min
For stripping rust, paint & coatings from metal surfaces. Can also be used on concrete with care. Always use a full face shield and protective clothing when Wet sandblasting.
Suction kit
Code
Description
AEKT SUCTIONKIT
Pump inlet connector + 4 meters 19mm hose + filter
For use with AES Low RPM Water blaster (fitted with reduction gear-box drive)
Enables your Water blaster to suck water from a tank, trough, pond or water race - up to 1 m head. ________________________________________________________________________________
Sludge Pump Kit
Code
Description
AEKT SLUDGEPUMP
Sludge pump kit c/w nozzle + 4 meters 32mm reinforced hose
Maximum pressure:
250 Bar (3650 psi)
Flow rate: Material:
10 to 30 L/min
Anodized aluminium 0 Degree 1/4" NPT
Jet size:
Highly efficient venture pump for removing water, sludge, sand & stones from ponds. troughs, tanks, drain sumps & pits. Uncouple your gun, connect your HP hose coupler to the nipple on the sludge pump.
Made with FlippingBook Digital Publishing Software