21
Accessories:
Wet Sand blasters
Code
Description
WETSANDKIT04 WETSANDKIT05 WETSANDKIT085 Spray pattern: Rated pressure: Max pressure: Max flow rate:
TS8 Wet sand kit .04 c/w 4m hose & sand probe (10-12 litres / min) TS8 Wet sand kit .05 c/w 4m hose & sand probe (13-20 litres / min) TS8 Wet sand kit .085 c/w 4m hose & sand probe (21-30 litres / min)
Round
250 Bar (3650 psi) 280 Bar (4000 psi)
40 L/min
For stripping rust, paint & coatings from metal surfaces. Can also be used on concrete with care. Always use a full-face shield and protective clothing when Wet sandblasting.
Code
Description
25.0450.00
TS12 Industrial Sandblaster Head 500 Bar
Spray pattern: Rated pressure: Max pressure: Max flow rate:
Flat 15 Degree fan 500 Bar (7250 psi) 560 Bar (8100 psi)
80 L/min
For stripping rust, paint & coatings from metal surfaces. Can also be used on concrete with care. Always use a full-face shield and protective clothing when Wet sandblasting.
Suction kit
Code
Description
SUCTIONKIT
Pump inlet connector + 4 meters 19mm hose + filter
For use with AES Low RPM Water blaster (fitted with reduction gear-box drive)
Enables your Water blaster to suck water from a tank, trough, pond or water race - up to 1 m head. _______________________________________________________________
Sludge Pump Kit
Code
Description
SLUDGEPUMP
Sludge pump kit c/w nozzle + 4 meters 32mm reinforced hose
Max pressure:
250 Bar (3650 psi)
Flow rate: Material:
10 to 30 L/min
Anodized aluminium 0 Degree 1/4" NPT
Jet size:
Made with FlippingBook Digital Publishing Software