EZ-TorQ III product specifications • Accuracy ± 0.5% of reading from 20% to 100%, accuracy ± 1% of reading from 10% to 20% • Seven units of torque measurement (ozf. in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm)
Run down adapters A run down adapter is required when testing power tools with the EZ-TorQ III. These are joint simulators that provide consistent and reliable torque readings for use with power-driven torque control tools. A run down adapter reduce the impact and irregular peaks that cause poor repeatability. The adapter is mounted inline between the tool's drive and the EZ-TorQ’s transducer. Run down adapters supplied with EZ-TorQ III EZ-TORQ III 1i One screw run down adapter for “hard joint” testing applications is supplied. EZ-TORQ III (3i–5i MODELS) One screw run down adapter for “hard joint” testing applications is supplied. One S-Series run down adapter for "soft joint" testing applications is supplied. EZ-TORQ III (10i–300i MODELS) Two screw run down adapters for “hard joint” testing applications are supplied.
• Torque Tester is recommended for hand screwdrivers, most wrenches and power tools (not for use in testing Impact or Pulse type tools.) • Selection of three operation modes: (Track, Peak and First Peak)
MODEL
ITEM NO.
TORQUE RANGES
DRIVE SIZE
WEIGHT
LBF.IN
CN.M KGF.CM
EZ-TorQ III 1i
070809
0.1–1
1.1–11.3
0.1–1.2
1/4" F/Sq
3.3 lbs
EZ-TorQ III 3i
070816
0.3–3
3.4–33.9
0.3–3.5
1/4" F/Sq
3.3 lbs
EZ-TorQ III 5i
070815
0.5–5
5.6–56.5
0.6–5.8
1/4" F/Sq
3.3 lbs
EZ-TorQ III 10i
070810
1–10
11.3–113
1.2–11.5
17mm Female/Hex
3.3 lbs.
EZ-TorQ III 50i
070811
5–50
56.5–565
5.8–57.6
17mm Female/Hex
3.3 lbs.
EZ-TorQ III 100i
070812
10–100
113–1130
11.5–115
17mm Female/Hex
3.3 lbs.
EZ-TorQ III 150i
070813
15–150
169.5–1695
17.3–173
17mm Female/Hex
3.3 lbs.
EZ-TorQ III 300i
070814
30–300
339–3390
34.5–345
17mm Female/Hex
3.3 lbs.
EZ-TorQ III models
EZ-TORQ III
1i
3i
5i
10i
50i
100i
150i
300i
Screw RDA
M2Q
M2Q
M3Q
M2 M3
M3 M4
M4 M6
M4 M8
M8 M12
S-Series RDA
–
RDA-S0 RDA-S1.5
*
*
*
*
*
Note: See page 8 for product specification for these run down adapters. *There are S-Series run down adapters available to be purchased separately for EZ-TorQ III (10i–300i models) for “soft joint” testing applications. See page 9 for additional model options.
EZ-TORQ III (10i–300i MODELS) Features a 17mm Hex drive size.
EZ-TORQ III (1i–5i MODELS) Features a 1/4" F/Sq drive size.
SD CARD All models have SD Memory Card slot.
6
7
Made with FlippingBook Annual report maker