Safety Information
TYRE SAFETY & PRESSURES SERVICING PROCEDURES OPERATIONAL SAFETY
Always cage tyres before seating beads.
Never exceed stated pressures when seating beads.
Do not attempt to mount a tyre unless you have the suitable equipment and experienced personnel.
Figure : 3.16 Tyre Safety Warning !
Inflating tyres can be dangerous. Always
stand to the side when inflating.
Failure to comply could result in serious injury or death.
Load ratings of replacement tyres should
meet or exceed weight requirements.
For correct Tyre pressure refer to 1. SPECIFI- CATIONS - Tyre Specification Table. Before mounting wheel to machine, check all hub and rim contact surfaces are undamaged and free of paint, dirt and grease. Lubricate wheel stubs with standard viscosity oil. Tension wheel nuts to the correct specification according to tyre size refer to 1. SPECIFICATIONS - Tyre Specification Table. For field operation: Re-tension after 1st, 5th, then every 50 hrs of operation. For road travel re-tension first 3 miles (5kms), 10 miles (15kms), and thereafter at 25 miles (40kms) intervals.
Figure : 3.17 Warning ! Tyre Pressure.
TYRE PRESSURE MAY VARY DEPENDING ON TYRES USED.
3.13.13
2915P Speedtiller Powerflex
OPERATOR & SAFETY MANUAL
2915P Op & safety manual.indb 13
6/02/2023 9:31:12 AM
Made with FlippingBook - Online Brochure Maker