Example - Multi Sequence Steps
Step
Command
Value
1
Count value = A
10
2
Select preset#
1
3
Fastening
-
4
Loosening
5
5
Select preset#
3
6
Fastening
-
7
Sub if (A)
-
8
Jump
2
9
End
-
10
None
-
1) Set 10 to Count A. 2) Select Preset #1.
3) Wait until the tightening is completed. 4) Rotating in reverse direction by 5 turns. 5) Select Preset #3. 6) Wait until the tightening is completed. 7) Check if the Count A value is -1 and 0. If it's not zero, go to Step 8, if it's zero, go to Step 9.
8) Move to Step 2. 9) Exit Sequence.
MountzCom III User Manual
30
Made with FlippingBook Annual report maker