Graphing
This process displays event data and captures the output data in graphing format. A total of two graph data types are shown, with Torque, Current, Speed, Angle, Speed command, Angle command, and Snug angle charts available only on Channel 1. When you right-click on the chart, a pop-up menu appears, and you can save it as an image through the function. Data specifications may vary depending on the selected Tool model .
(No other parameters are read during monitoring. At the bottom of the Software, you will see a warning statement about it)
Action
A. Save Graph monitor data to a file. Not available during monitoring. The data is stored as a CSV file, along with the selected Tool model, Firmware version, Serial number, and etc. B. Open: Loads stored Graph monitor data. Not available during monitoring. C. Clear: Delete all Graph monitor data displayed on the screen. D. Auto saving data: Save Graph monitor data automatically to the path you set. The feature works only when the path is set with Option enabled and is saved in the form.
[Set Path]\[MountzCom]\[Year]\[Month]\[Day]\[Tool type]_[Tool model name]_[Serial number].csv]
Setting & Start / Stop
A. Channel 1 or 2 : Set the Chart Type for Channel 1 or 2. B. Sampling : Set the sampling interval for graph data. C. Option : Set whether to receive data for all directions or positive or reverse directions. D. Start/Stop : Start or stop Graph monitor.
MountzCom III User Manual
37
Made with FlippingBook Annual report maker