Select Tool
Select a tool in EPC-10 to control and click the Remote tool select button on the System menu, or double-click the selected tool item to change the icon to the right of the tool to the eye and select the tool.
If the tool is not selected , the EPC-10 information is displayed at the bottom.
When the tool is selected , information about the selected tool is displayed at the bottom.
You can use the Parameters and Monitoring in the Tool manager menu with the tool selected. The EPC-10 allows you to change the parameters or perform tightening monitoring remotely. menus 10 allows you to change the parameters or
Tool Manager
The list on the left consists of tools currently registered with EPC-10. The list on the right consists of tools that can be registered. Select the desired tool from the list on the right and press the Register button on the center to move the tool on the right to the left. Conversely, if you select the desired tool from the list on the left and press the central Release button, the tool on the left will be deleted and added to the list on the right (if the tool is powered on).
You can change the name of the tool by selecting the tool you want from the registered tool and pressing the “…” button in the Tool name item. Changing the name of the tool automatically applies to EPC item. Changing the name of the tool automatically applies to EPC-10.
MountzCom III User Manual
49
Made with FlippingBook Annual report maker