JOB Manager
To go to the Step Manager screen, press the button. Here you can add, delete, and modify the step of the selected JOB Press the Fastening, Input, Output, Delay, Message buttons in the upper left corner to create a new step and t corner to create a Edit
Right-click to display a menu, where you can change the image, change the number of the currently selected tightening point, add, ordelete tightening points, and change the size or color of the number to be displayed on the currently selected tightening point click to display a menu, where you change the image, change the number ected tightening point, add, ing points, and change the size e number to be displayed on the d tightening point
When the user attempts to close the window, a window appears asking if you want to save the position data as shown below. Press the OK button to apply the changes to the corresponding Fastening the Cancel button if you do not want the changes to be applied Position step. Press if you do not want the
In the list on the left, you can view the currently generated step list in turn
Move, delete, copy, and rename the lower left corner
selected steps in
To the right, you can view or modify the details for the selected step
For Fastening step, you can enter the menu where you can press the green arrow buttons in the bottom left corner to set the number that displays the image and the order of the tightening screws Position
When the modification is complete, it must be s by pressing the Save button in the upper right corner When the modification is complete, it must be saved
Saved JOB is automatically applied to EPC Saved JOB is automatically applied to EPC-10
The Position menu allows you to set the display of the images to be displayed in the Fastening and the order of tightening screws step
MountzCom III User Manual
51
Made with FlippingBook Annual report maker