Attachment Catalog
1
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Sterngold Dental
Sterngold | Attachment Catalog
TABLE OF CONTENTS
Why Sterngold? ......................................................................................................................................................................3 Return Policy and Company Certifications ............................................................................................................4 Working With Attachments..............................................................................................................................................5 Definition of Dimensions.............................................................................................................................................. 6-7 Partial Denture (Resilient) ERA® ..........................................................................................................................................................................................9 Dalbo......................................................................................................................................................................................10 Hader Vertical, IC Male.................................................................................................................................................11 Partial Denture (Rigid) Stern GL. 070......................................................................................................................................................................12 Overdenture Attachments, Stud & Anchor ERA® Direct...................................................................................................................................................................13-14 ERA® Castable....................................................................................................................................................................15 Dalla Bona............................................................................................................................................................................16 Ball & O-Ring Castable, Endopost Kit..................................................................................................................17 Stern Root Anchor...................................................................................................................................................18-19 Overdenture Bar Attachments Hader Bar..............................................................................................................................................................................20 LV HOR...................................................................................................................................................................................21 LV OCAD...............................................................................................................................................................................22 LV KON..................................................................................................................................................................................23 Dolder Bar............................................................................................................................................................................24 ERA®, Stern SNAP®, Ackermann..............................................................................................................................25 Implant Overdenture Attachments Stern SNAP® & SNAP® Angled.................................................................................................................................26 ERA®.........................................................................................................................................................................................27 ORA®.......................................................................................................................................................................................28 Zest LOCATOR®.................................................................................................................................................................29 Segmented Bridgework Attachments JV2, Tube Lock...................................................................................................................................................................30 Cap Screw, Pin Screw...................................................................................................................................................31
2
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Sterngold Dental
Sterngold | Attachment Catalog
Affordable Dental Access. Enhanced Quality of Life.
Why Sterngold?
Affordability Affordability and quality merge in our products so you can remain competitive by providing advanced treatments, with the opportunity to generate a good rate of return.
Access Access to our full range of quality, up-to-the-minute, precision-engineered, yet affordable products.
Access to our full pre- and after-sales support, through technical and educational expertise, well-informed sales insights, industry collaboration, and first-rate customer service.
Helping improve quality of life We carry restorative dental products that, by nature, aim to enhance quality of life. What’s in it for you?
Dental Practice We empower the achievement of your practice goals: patient satisfaction, treatment effectiveness, and business growth.
Dental Laboratory We enable you to stay competitive in the changing landscape of dental technology.
About Us Sterngold Dental, LLC, is a global player with a rich and celebrated history in the dental community. We are recognized by the name Sterngold Dental and the shorter reference, Sterngold. While forward looking, Sterngold credits its solid reputation in restorative dentistry, in particular, and in providing quality products for the dental community, in general, to its storied history that traces back to 1897. Thriving for over a century and a quarter speaks volumes on ability and credibility and the milestones are many.
3
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Sterngold Dental
Return Policy and Company Certifications
RETURN POLICY
STERNGOLD DENTAL, LLC'S QUALITY POLICY STATEMENT
• We will provide our customers with consistent, superior products, components, and accessories at competitive prices, on time • We ensure that our products and services meet or exceed the requirements of the Quality System guided by EN ISO 13485:2016 and the Canadian Medical Device Regulations, MDD 93/42/EEC, MHLW Ministerial Ordinance No. 169, Brazil ANVISA RDC requirements and the Food and Drug Administration’s Quality System Regulations and Current Good Manufacturing Practices. • We will strive for continued development of the Quality Management System and to meet or exceed all customer expectations
Please review your invoice and products before opening the package.
All returns must have prior authorization from Sterngold. Please call our Customer Service Department at 800-243-9942 to obtain a return authorization number and clearly write the issued number on the outside of the Shipping package. All unopened products must be in resalable condition. A copy of the invoice or packing slip must be enclosed with the return. Return freight costs are the Customer's responsibility. Sterngold is not responsible for any lost or damaged products returned to us. Please allow 2 to 4 weeks for return processing. No credit will be provided for freight costs on original invoice. ATTACHMENTS, IMPLANTS AND CONSUMABLES No returns are accepted after 30 days from purchase date. Any opened products will not be accepted for credit. Any unopened product returned within 30 days of the invoice date will be subjected to a 20% restocking fee. ALLOYS Our 30-day product guarantee on all alloys permits the return of metal in quantities of 5-ounces or less. When returned within 30 days, credit will be issued at the original invoice price for the quantity of material returned (including buttons). Unopened metal returned within 30 days from delivery date will be issued credit at 20% off the original invoice price or intrinsic based on the current market, whichever is lower. OSHA REGULATIONS: To comply with Federal Regulations and Sterngold's infection control program, all items not returned in their original, unopened packaging must be disinfected and shipped in compliance with current OSHA rules. Failure to follow OSHA regulations will result in your package being returned at your expense. Items which can be used in the mouth must be disinfected and repackaged in a heat sealed envelope labeled with a notice of disinfection.
4
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Sterngold | Attachment Catalog
WORKINGWITHMETAL ATTACHMENTS Depending on the attachment’s design, metal components are anchored in denture acrylic, soldered to a casting, or invested along with a wax pattern and cast against with a dental alloy. Use an alloy with a casting temperature at least 100°F (40°C) below the lowest value of the component’s melting range when casting against an attachment component.
Melting Ranges of Attachments
Melting Range
Attachment Components
Degrees F 2600–2760 2550–2715 1705–1860 1615–1725 3308-3362 2700–2850 1885–2010
Degrees C 1425–1515 1400–1490 930–1015
Ceramacast Ceramicor
Doral Elitor
880–940
Iridium–Platinum
1820–1850 1480–1565 1030–1100
NPS OSV
Attachment Selection In citing common applications for dental attachments, Sterngold is reporting uses adopted by clinical authorities and does not endorse any particular philosophy of treatment. We recommend you consult the dental literature. Measuring For Attachments Sterngold works hard to make using attachments easy for you. In this catalog we provide our best advice on space requirements based on extensive practical experience. Each attachment description lists the minimum space required for placement of the attachment with high assurance of successful, long-term function. Allowances are made for dental casting alloys and denture acrylic that surround or hold the attachment component. With this information you can measure a study cast and decide if an attachment can be used in the available space. Allowances Denture acrylic thickness • Occlusal to extracoronal attachment components, bars, and overdenture attachments (influences height), 1mm • Lateral to attachment components (influences removable component width), 1mm on each side Casting alloy thickness • For root cap coping (influences height), 0.5mm • Between a box preparation axial wall and a metal intracoronal precision attachment female (influences prep depth), 0.4mm
Solder thickness (influences height), 0.3mm
Note: At least 0.5mmof casting alloymust separate the attachment female froma porcelain fused tometal veneer.
5
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Sterngold | Dental Attachments
DEFINITIONS OF DIMENSIONS
Overdenture Attachments
Partial Denture Attachments
Height Minimum required distance from the papilla to the opposing occlusal surface.
Height Minimum required distance from the surface of the prepared abutment root to the op- posing occlusal surface.
Prep Depth Minimum depth of tooth structure needed for preparation of the attachment space.
Prep Depth Minimum depth of tooth structure needed for preparation of the attachment space.
FCWidth Fixed Component of the attachment Minimum faciolingual space necessary for the fixed attachment component.
FCWidth Fixed Component of the attachment Minimum diameter of the space required for the fixed attachment component. Measure the smallest diameter of the root surface.
RCWidth Removable Component of the attachment Minimum faciolingual space required in the prosthesis for the removable attachment component.
RCWidth Removable Component of the attachment Minimum diameter of the space needed in the prosthesis for the removable attachment component.
6
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Sterngold | Dental Attachments
DEFINITIONS OF DIMENSIONS
Bar Attachments
Segmenting Attachments
Height Minimum required distance from the surface of the prepared abutment root to the op- posing occlusal surface..
Height Minimum required distance from the papilla to the opposing occlusal surface when the attachment is used only for segmentation.
FC Height Fixed Component of the attachment Minimum occlusogingival space needed for the bar.
Prep Depth Minimum depth of tooth structure needed for preparation of the attachment space.
FCWidth Fixed Component of the attachment Minimum faciolingual space needed for the bar.
Width Minimum faciolingual space necessary for the attachment.
RCWidth Removable Component of the attachment Minimum faciolingual space required in the prosthesis for the removable attachment component.
RPDHeight Removable Partial Denture Minimum required distance from the papilla to the opposing occlusal surface when the attachment is later converted to a removable partial denture retainer.
7
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Sterngold | Partial Denture Attachments – Resilient
ERA®
These stress directing attachments for Kennedy Class I and II cases place occlusal load on both the abutment teeth and the edentulous ridge. The ridge is more heavily loaded than when using rigid attachments, and the abutment teeth are more lightly loaded.
ERA ® –RV (STANDARD) ANDMICRO ERA ®
• Extracoronal semi–precision attachment • Universal hinge with vertical resiliency • Nylon male, plastic pattern female • Black fabrication male with built–in spacer • Six color-coded males to create a consistent level of retention (white, orange, blue, grey, yellow and red) • Two additional males available in green and purple for cases where the red male is no longer retentive enough (for ERA-RV only) • Males easily changed without use of autopolymerizing acrylic • Optional ERA® Metal Jacket holds the attachment male in the denture base and is sold pre–loaded with a black fabrication male. Stainless steel to allow soldering or laser welding.
White, Orange, Blue, Grey, Yellow, Red, Green, Purple
Fixation Male— retained directly in processed denture acrylic or ERA®–RV/Micro ERA® Metal Jacket Female—cast as part of crown pattern
Cast plastic components using alloys with aminimumVickers hardness of 200 and at least 85,000 psi ultimate tensile strength. Appropriate choices are Pegasus ceramic alloy and Sterngold 100 crown and bridge alloy for yellow gold castings.
Partial Denture Processing Jig
ERA®-RV (standard) MinimumSpace Required Definitions of Dimensions, pages 6-7 Height FCWidth Prep Depth
Paralleling Mandrel
RCWidth
3.5mm†
2.8mm
Normal crown
6.3mm
ERA®Metal Jacket thickness: 0.3mm †Add 1.0mm for patients with habitually strong bites.
ERA® Attachment Extraction Tool
Micro ERA® MinimumSpace Required Definitions of Dimensions, pages 6-7 Height FCWidth Prep Depth
ERA®–RV Metal Jacket
RCWidth
3.0mm†
2.2mm
Normal crown
5.4mm
ERA®Metal Jacket thickness: 0.3mm †Add 1.0mm for patients with habitually strong bites.
ERA®-RV Micro ERA® Impression Copings
Core Cutter
Seating Tool
8
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Sterngold | Partial Denture Attachments – Resilient
ERA®
Micro ERA®-DE Female - cast-to or laser welded
The Micro ERA ® Attachment is 20% smaller than the ERA ® -RV, making it the smallest extracoronal resilient attachment in the world. (only 2mm tall and 3.4mmwide )
Micro ERA® Female
ERA®-RV Female
ERA®-RV 2.5mmOffset
ERA®-RV 45˚ Partial Offset
ERA®-RV 4.5mmOffset
3.4mm
4.3mm
ERA-RV (standard)
Micro ERA®
ERA® STARTER KIT
811105
811011
2.5mm
2.0mm
2 attachments, 2 metal jackets, 2 processing jigs, 1 core cutter bur, 1 seating tool, and 1 paralleling mandrel
Micro
RV
ERA® COMPLETE ATTACHMENT 1 female, 2 black males, 2 white males, 1 orange male ERA®-RV/Micro ERA®
811115 811204 811203 811205
811012
ERA®-RV Offset 2.5 ERA®-RV Offset 4.5
N/A N/A N/A
ERA®-RV 45˚ Partial Offset
ERA® FEMALE
811190 811202 811201
811010
ERA®-RV/Micro ERA® Female ERA®-RV Offset 2.5 Female ERA®-RV Offset 4.5 Female
N/A N/A
811609 811607
Micro ERA®-DE Female - cast-to Stainless
N/A N/A
ERA®-RV Offset 2.5
Micro ERA®-DE Female - Titanium
Micro ERA® Female
ERA® MALES
811125 811135 811145 811155 811165 811175 811176 811166 811126 811129
811013 811014 811015 811016 811017 811018 811019 811009
Black Fabrication, 5
White, 5 Orange, 5
Blue, 5 Grey, 5
Yellow, 5
Red, 5
ERA®-RV Female
Assorted, 7
1 ea. black, white, orange, blue, grey, yellow, and red Green, 5
N/A N/A
Purple, 5
ERA®-RV Offset 4.5
ERA® COMPONENTS
811168
811021
ERA® Metal Jacket with fabrication male Laboratory Tool Kit
811200
811025
Core cutter bur, seating tool and paralleling mandrel Dentist Tool Kit
811240
811026
Core cutter bur and seating tool ERA® Core Cutter Bur
Micro ERA® Partial Metal Jacket
ERA®-RV Metal Jacket
811220 811230 811210 811250 811232 811027 220237 801660
811023 811022 811024 811020 811235 811027
ERA® Seating Tool
ERA® Paralleling Mandrel ERA® Partial Processing Jig
ERA® Partial Impression Coping
Attachment Extraction Tool
ERA®-RV Micro ERA® Impression Copings
EZ PickUp Syringe, Tips & Varnish
Figerglass Brush
9
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Sterngold | Partial Denture Attachments – Resilient
DALBO®
DALBO ® (DALBO ® -S)
• Extracoronal precision attachment • Directed hinge featuring lateral stability, vertical resiliency with return spring and hingingmovement • Gold alloy (Ceramicor) • Gold alloy female, Elitor for Ceramicor males • Standard andmini sizes. Mini Dalbo lacks vertical resiliency. • Unilateral design can also be used in bilateral applications; has a deeper vertical bar for more lateral stability.
Standard Unilateral Dalbo
Fixation Male—Ceramicor males soldered or cast to withmost precious alloys. Female—Polymerize into denture acrylic
MinimumSpace Required Definitions of Dimensions, pages 6-7 Elitor females, Ceramicormales: FC Prep
RC
Height 6.0mm 4.0mm
Width 3.4mm 3.4mm
Depth 1.6mm 1.6mm
Width 5.5mm 5.5mm
Standard Unilateral
Mini Unilateral
Mini Unilateral Dalbo
PRECIOUS ALLOY RETAINER CROWNS (Elitor females andCeramicormales) Item
Number 051244 051513 051243 050701 050697 050960 Number 070176 070174 070146 070149 051143
Standard Unilateral
Mini Unilateral
Standard Unilateral Dalbo
Standard Unilateral Female with spring
Standard Unilateral Male
Mini Unilateral Dalbo Mini Unilateral Female Mini Unilateral Male COMPONENTS Item Mini Processing Jig Standard Processing Jig
ParallelingMandrel
Standard Fabricating Plug Standard Coil Springs, 6
10
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
HADER VERTICAL, IC MALE
Sterngold | Partial Denture Attachments – Rigid
RESILIENT ATTACHMENTS FOR REMOVABLE PARTIAL DENTURES
Hader Vertical
• Extracoronal semi–precision attachment • Very slight hinging motion makes it functionally compatible with clasp retainers on the contralateral side of the arch. • Nylon clip and plastic pattern male • Loads abutment tooth more strongly than other resilient attachments
Hader Vertical Kit
Fixation Male — cast as part of crown pattern Clip — frictionally held in removable partial denture framework Cast plastic male using alloys with aminimumVickers hardness of 200 and at least 85,000 psi ultimate tensile strength. Appropriate choices are Pegasus ceramic alloy and Sterngold 100 crown and bridge alloy for yellow gold cast- ings.
Minimum Space Required Definitions of Dimensions, pages 6-7 FC Prep RC Height Width Depth Width Normal 4.5mm 1.8mm Crown 5.0mm
Hader Vertical Clips
Item
Number 810040 810058 810003 810005 810007 810055
Hader Vertical Kit
Attachments (6) and seating tool Hader Housing, 6
Riders, white, 6 Riders, yellow, 6
Riders, red, 6
Males, 6
IC Male • Precision spring operated plunger attachment. • Does not require an abutment crown. • All Stainless steel. • Limited vertical resiliency and hinge movement for removable partial dentures. • Fixation: Male plunger and spring unit - polymerized into denture acrylic.
Minimum Space Required Definitions of Dimensions, pages 6-7 FC Prep RC RC Height Width Depth Width Length* 4.0mm† 2.0mm 0.8mm 4.0mm 6.0mm †Add 1.0mm for patients with habitually strong bites. * Removable component length ismeasured from the tip of the pawl plunger to the end of the housing plus 1mm.
Item
Number 806008
IC Male, Anterior
11
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Sterngold | Partial Denture Attachments – Rigid
STERN GL .070
RIGID ATTACHMENTS FOR REMOVABLE PARTIAL DENTURES Rigid attachments are highly stable connectors with very slight movement in function. When abutment teeth are stable, rigid attachments are often the connectors of choice. Some can be used for segmenting fixed partial dentures to simplify future case conversion to a removable restoration.
In distal extension partial denture cases, occlusal forces are directed to both the abutment teeth and the edentulous ridge, with emphasis on the teeth. Therefore, rigid attachments are kinder to the edentulous ridge than are resilient attachments.
STERN G/L .070 REPLACEMENT MALES
Due to the popularity and longevity of the .070 G/L attachment, we have introduced a .070 G/L replacement male. These males are made of a type of stainless steel which is close in physical properties to the original gold males. They also are designed with a“tail”on the back of the male (ESI) so that you can process them directly into the denture acrylic as well as connecting them to the frame by soldering or welding. These newmales have a latch that is adjustable with the original G/L adjusting tools.
• Stainless Steel • Precision machined • Adjustable gingival latch
Fixation Soldered or laser welded to a removable partial denture framework or polymerized into denture acrylic. Item Number .070 G/L ESI Replacement Male 802803 Sterngold Attachment Gauge 812018
12
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
ERA® DIRECT
Sterngold | Overdenture Attachments – Stud & Anchor
Large Diameter Post
ERA ® DIRECT OVERDENTURE
Small Diameter Post
• Resilient precision attachment • Radicular snap • Universal hinge with vertical movement • Nylonmale • Stainless steel female with titaniumnitride coating • Black fabricationmale with built–in spacer • Six color-codedmales to create a consistent level of retention (white, orange, blue, grey, yellow, red) • Optional ERA® Metal Jacket holds the attachment male in the denture base and is sold pre–loaded with a black fabricationmale. Stainless steel to allow soldering or laser welding. • Four post angles: 0˚ (straight), 5˚, 11˚, and 17˚ • Males changed without use of autopolymerizing acrylic
9.0mm post length (standard & micro
1.7mm post (standard only)
1.3mm post for standard & micro
Fixation Male—retained directly in processed denture acrylic or an ERA® Overdenture Metal Jacket Female—post cemented in prepared root
White, Orange, Blue, Grey, Yellow, Red
MinimumSpace Required Height
FCWidth
PrepDepth RCWidth
Standard
4.0mm† 3.0mm†
4.3mm 3.4mm
5.0mm 5.0mm
6.3mm 5.4mm
Micro
†Add1.0mmfor patientswithhabitually strongbites. ERA®Metal Jacket thickness: 0.3mm
ERA® DIRECT OVERDENTURE KITS
Standard
Standard
Micro
Post Diameter Post Length
Small 1.3mm
Large 1.7mm
Small 1.3mm
9mm
9mm
9mm
Master Kit 811403 Kit Contains: Five females, (2- 0°, 1 each5°, 11°, and17°),males, 5 sets of 5, (two eachofwhite andblackandone orange), 2processing jigs, 2alignment handles, 1of eachguttaperchadrill, pilot drill, countersinkbur, core cutter bur and seating tool, and2metal jackets. 811400 811402 Basic Kit 811413 Kit Contains: Three females, (2-0° 1-11°)males, 3 sets of 5, (two eachofwhite andblackandone orange) 2alignment handles, 1of eachpilot drill, countersinkbur, core cutter bur, seating tool, and2metal jackets. 811410 811412 MixedKit n/a Kit Contains: small diameter post females, 2-0° plus one each5°, 11°, and17°, largediameter post females, 2-0° plus one each5°, 11°, and17°,males, 10 sets of 5 - 2 eaofwhite, blackand1orange, 2 sets of 4, 4processing jigs, 4alignment handles, pilot drills (1 small diameter and1 largediameter), countersinkburs (1 small diameter and 1 largediameter), guttaperchadrill, core cutter bur and seating tool, and2metal jackets. 811398 811398
ERA® Direct Master Kit #811400
13
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
ERA® DIRECT
Sterngold | Overdenture Attachments – Stud & Anchor
ERA®Direct Overdenture CompleteAttachment 1 female, 2blackmales, 2whitemales, 1orangemale STANDARD
MICRO
Small Post 811420 811425 811430 811435
Large Post 811470 811475 811480 811485
Small Post 811424 811429 811434 811439
0˚ 5˚
11˚ 17˚
ERA® Direct Overdenture Standard Post (Large and Small)
ERA® Direct Overdenture Angled Posts
ERA®Direct Overdenture Female STANDARD
MICRO
Small Post 811421 811426 811431 811436
Large Post 811471 811476 811481 811486
Small Post 811422 811427 811432 811437
0˚ 5˚
11˚ 17˚
ERA®OverdentureMales
Item
STANDARD 811320 811330 811340 811350 811360 811370 811375 811365
MICRO
811035 811036 811037 811038 811039 811040 811041 811029
Black Fabrication, 5
White, 5
Orange, 5
Blue, 5 Grey, 5
Alignment Handle with angled post
Yellow, 5
Red, 5
Assorted, 7
1 each: black, white, orange, blue, grey, yellowand red
ERA®Overdenture Components Item ERA® Overdenture Metal Jacket with fabricationmale
STANDARD
MICRO
811380 811240 811220 811230 811027 811440 811445 811448 811450 811452 811455
811043 811026 811023 811022 811027 811440 811445
Dentist Tool Kit
ERA® Core Cutter Bur ERA® SeatingTool
ERA® Overdenture Metal Jacket
Attachment ExtractionTool
Gutta Percha Drill, Pilot Drill, Countersink Bur
Gutta Percha Drill Pilot Drill, Small Post
n/a
Large Post
811453
Counter Sink Bur, Small Post
n/a
Large Post
811456
Alignment Handles, 2 ERA® Overdenture Processing Jig ERA® Overdenture Impression Coping Resiment Ready-Mix
ERA® Overdenture Impression Coping, Standard
ERA® Overdenture Processing Jig
811395
811042
811233 RRM-FL
811236
Resiment Ready-Mix
14
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
ERA® CASTABLE
Sterngold | Overdenture Attachments – Stud & Anchor
ERA ® CASTABLE Anchoring an overlay denture to retained roots enhances denture stability. Overdenture attachments are available with rigid or resilient function. Due to compromised periodontal support, resilient designs aremost commonly used. STANDARD AND MICRO ERA ® OVERDENTURES
• Resilient semi–precision attachment • Radicular snap • Universal hinge with vertical movement • Nylon male, plastic pattern female • Black fabrication male with built–in spacer • Six color-coded males to create a consistent level of retention (white, orange, blue, grey yellow, red) • Optional ERA® Metal Jacket holds the attachment male in the denture base and is sold pre–loaded with a black fabrication male. Stainless steel to allow soldering or laser welding. • Males changed without use of autopolymerizing acrylic • The Micro is 20% smaller than the standard. This saves 0.5mm in height and almost 1mm in width with no loss of retention or longevity.
White, Orange, Blue, Grey, Yellow, Red
Standard
Micro ERA®
ERA®
ERA® Overdenture Starter Kit 2 attachments, 2 metal jackets, 2 processing jigs, 1 core cutter bur, 1 seating tool, and 1 paralleling mandrel
811300
811045
ERA® Overdenture Attachment
811310
811044
Fixation Male — retained directly in processed denture acrylic or ERA® Overdenture Metal Jacket Female — cast as part of root cap coping
1 female, 2 black males, 2 white males, 1 orange male
ERA® Overdenture Female
811390
811030
Cast plastic components using alloys with aminimumVickers hardness of 200 and at least 85,000 psi ultimate tensile strength. Appropriate choices are Pegasus ceramic alloy and Sterngold 100 crown and bridge alloy for yellow gold castings. Minimum Space Required Definitions of Dimensions, pages 6-7 Height FCWidth Prep Depth RCWidth Standard ERA® 4.2mm† 4.3mm N/A 6.3mm Micro ERA® 3.6mm† 3.4mm N/A 5.4mm †Add 1.0mm for patients with habitually strong bites. ERA® Metal Jacket thickness: 0.3mm
ERA® Overdenture Males Black Fabrication, 5
811320 811330 811340 811350 811360 811370 811375 811365
811035 811036 811037 811038 811039 811040 811041 811029
White, 5 Orange, 5
Blue, 5 Grey, 5
Yellow, 5
Red, 5
Assorted, 7
1 each: black, white, orange, blue, grey, yellow, and red
Laboratory Tool Kit
ERA® Overdenture Metal Jacket with fabrication male
811380 811200
811043 811025
Laboratory Tool Kit
Core cutter bur, seating tool and paralleling mandrel Dentist Tool Kit
811240
811026
ERA® Overdenture Metal Jacket
Core cutter bur and seating tool ERA® Core Cutter Bur
811220 811230 811210 811395 811233 811027 801660 812018 220237
811023 811022 811024 811042 811236 811027
ERA® Seating Tool
ERA® Paralleling Mandrel
ERA® Overdenture Processing Jig ERA® Overdenture Impression Coping ERA® Attachment Extraction Tool
ERA® Overdenture Impression Coping
ERA® Overdenture Female
Fiberglass Brush
Sterngold Attachment Gauge EZ® PickUp Syringe, Tips & Varnish
ERA® Overdenture Processing Jig
ERA® Attachment Extraction Tool
15
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
DALLA BONA
Sterngold | Overdenture Attachments – Stud & Anchor
DALLA BONA
• Rigid or resilient precision attachment • Radicular telescopic stud and radicular ball and socket joint • Adjustable frictional retention • Gold alloy male (Elitor) and (OSV or Elitor) female • PVC ring surrounds the female to protect adjustment slots from acrylic. • Spherical fabricated using removable spacer for vertical and universal hingemovement
Fixation Male—soldered to cast root coping Female— polymerized into denture acrylic
MinimumSpace Require d Definitions of Dimensions, pages 6-7 Height FCWidth PrepDepth
RCWidth
Rigid
5.0mm† 5.8mm†
3.1mm 3.1mm
N/A N/A
5.7mm 5.4mm
Resilient
†Add1.0mmfor patientswithhabitually strongbites.
Cylindrical Rigid (Dalbo-Z)
Spherical Resilient (Dalbo-B)
Item
Number 050398 051507 050272 070131 070157 801181 070197 070199
Item
Number 050427 051511 050423 070131 070157 801181 070197 070199
Dalla Bona Cylindrical (Dalbo®-Z)
Dalla Bona Spherical (Dalbo®-B)
Female
Female
Male
Male
ParallelingMandrel
ParallelingMandrel
Processing Jig
Processing Jig
PVC Ring Activator
PVC Ring Activator
DeActivator
DeActivator
Paralleling Mandrel
Processing Jig
Dalla Bona Spherical (Dalbo®-B)
Dalla Bona Cylindrical (Dalbo®-Z)
PVC Ring
Activator
DeActivator
16
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Ball & O-Ring Castable, Endopost Kit
Sterngold | Overdenture Attachments – Stud & Anchor
BALL AND O-RING CASTABLE ORACompleteAttachment Includes: 1plasticORAmale Pattern, 1goldplated closed retaining cap, and1whiteblock-out spacer.
904700
Fixation Male—cast as part of a root cap coping Retaining Cap—retained directly in processed denture acrylic
MinimumSpace Required Height FCWidth
PrepDepth RCWidth
6.0mm
2.3mm
5.0mm
6.0mm
Item
Number 904064 811001 909012 220237 220180
ORA Retaining Cap ORA Processing Jig
White O-Ring
EZ® PickUp Syringe, Tips &Varnish
QuickLine Intro Kit
ENDOPOST KIT Master Endopost Kit
Laboratory Post Kit Economical plastic post patterns in two sizes for cast post and corebuild-ups, and for root cap copings. The kit includes burnout patterns. Precisionmade inAustriaby Hader. (50 each large& small burnout patterns.) 810035
Economical plastic post patterns in two sizes for cast post and corebuild-ups, and for root cap copings. The kit includes tapered sizingdrills for post site preparation, impression transfer posts, andburnout patterns. Precisionmade inAustriabyHader. Includes 2drills, 25 each large& small impressionposts, 25 each large& small burnout posts. 810030
17
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
STERN ROOT ANCHOR
Sterngold | Overdenture Attachments – Stud & Anchor
STERN ROOT ANCHOR ®
SternRoot Anchor ® • Resilient precision attachment • Intraradicular ball and socket joint • Universal hinge • Nylonmale, titanium female • Three color codedmales for three levels of retention (lightest to strongest): white, orange, grey • Standard andmini size • Black collar males used with standard females • White collar males used withmini females Fixation Male—polymerized into denture acrylic Female—cemented directly into root preparation MinimumSpace Required Definitions of Dimensions, pages 6-7 Height FCWidth PrepDepth
SternRoot Anchor ® Kits
5Root Refill Kit 5 females, 10 standard retentionmales, 5 transfermales, 5 caps, nobur For Standard Female
For Mini Female
833080
833085
5 Root Refill kit
10Root Refill Kit 10 females, 20 standard retentionmales, 10 transfermales, 10 caps, nobur For Standard Female
For Mini Female
833090
833095
10 Root Refill Kit
RCWidth
Standard Anchor
3.3mm† 3.3mm†
4.7mm 3.2mm
7.0mm 4.0mm
5.5mm 5.5mm
Mini Anchor
†Add1.0mmfor patientswithhabitually strongbite.
Male
Stern Root Anchor® for Mini Females
Mini Female
Standard Female
Item
Number 811900 812018 220237 801660
ERA Lock Cement
Sterngold Attachment Gauge EZ® PickUp Syringe, Tips &Varnish
Fiberglass Brush
18
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
STERN ROOT ANCHOR
Sterngold | Overdenture Attachments – Stud & Anchor
STERN ROOT ANCHOR ®
SternRoot Anchor®Males
For Standard Female For Mini Female black collar white collar
833140 833150 833151 833145
833240 833250 833251 833245
StandardWhite Males, 5 Oversized Orange Males, 5 Extra Oversized Grey Males, 5
Standard Transfer Male
Transfer Blue Males, 5
Mini Oversized Orange Male
Standard Extra Oversized Grey Male
SternRoot Anchor®Drills &Burs
For Standard Female For Mini Female
833111 833105 833110
833121 833115 833120
One–Step Right Angle Drill Latch Right Angle Diamond Bur
Standard
Friction Grip Diamond Bur
Mini One–Step Drill
Item
Number 833125 833130 833155 833160 833170
Standard Female
Standard
Standard
Mini Female
Caps, 5
Female Replicas, 5 Laboratory Spacers, 5
Mini
Mini
Latch Right Angle Diamond Bur
Friction Grip Diamond Bur
19
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
HADER BAR
Sterngold | Overdenture Attachments – Bar
Bars splint two or more abutments and provide the option of attachment reten- tion to a removable prosthesis. The abutment can be a prepared tooth with a cemented crown retainer, an endodontically treated root with a cast post and
coping retainer, or it may be an artificial abutment supported by an osseointe- grated dental implant. Attachment function can be rigid or resilient, depending on the bar chosen and on the case design.
HADER BAR ®
• Semi–precision bar attachment • Hingingmovement • Plastic bar pattern, plastic riders • Mechanical snap retention
• Three color coded riders for three retentive strengths (lightest to strongest): white, yellow, red. Can be used with or without the Hader metal housing. • Optional adjustable gold alloy rider Fixation Bar—pattern cast as part of retainer castings Plastic rider—retained in processed denture acrylic socket, optional metal housing available Gold rider—polymerized into denture acrylic Cast thebar patternusingalloyswithaminimumVickers hardness of 200andat least 95,000psi ultimate tensile strength. Appropriate choices are Pegasus™ceramic alloy andSterngold100™crownandbridge alloy for yellowgold castings.
MinimumSpace Required Definitions of Dimensions, pages 6-7 Height FCWidth FCHeight
RCWidth
Hader Bar® Kit
Nylon Rider Gold Rider
4.5mm† 4.5mm†
1.8mm 1.8mm
2.5mm 2.5mm
5.0mm 5.0mm
†Add1.0mmfor patientswithhabitually strongbites. Hader Housingdimensions: Thickness, 0.3mm Width (wingedge towingedge), 5.0mm Length, 5.0mm
Retention Rider
Item
Number 810001 810018 810003 810005 810007 810010 810058 810015 810025 050527 810013 810017 812018 220237 801660 AC-674-P
Hader Bar® Kit
2bars, 6 yellowriders, 6 fabricating riders, 1 seating tool Hader SG Retention Riders, Yellow, 6
Hader Bar® Retention Riders,White, 6 Hader Bar® Retention Riders, Yellow, 6 Hader Bar® Retention Riders, Red, 6 Hader Bar® Fabricating Riders, 6
Bar Section
Metal Housings, 6
Bars Only, 6
Fabricating Rider
SeatingTool, 2 Gold Alloy Rider
(Elitor) rider with spacer Hader Bar® Processing Jig
Hader Bar® Impression Coping Sterngold Attachment Gauge EZ® PickUp Syringe, Tips &Varnish
Paralleling Mandrel
Hader Bar® Impression Coping
Fiberglass Brush ParallelingMandrel
Hader Bar® Processing Jig
Hader Clip
Metal Housing
20
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
LV HOR
Sterngold | Overdenture Attachments – Bar
LV HOR Standard Housing HR-642-3CR Housing for LV HOR standard rider, for soldering, bond- ing or acrylic retention. L: 5mm, H: 2.90mm, W: 4.10mm, 2 pieces
LV HOR Standard Processing Rider HR-652-9 LV HOR Standard self-isolating processing rider. L: 5mm, H: 4.85mm, W: 3.30mmes, 6 pieces
AC-173-I
Universal Insertion Tool Universal insertion tool for LV VER/LV HOR/LV OCAD females/riders
LV HOR Mini Housing HR-643-3CR Housing for LV HOR mini rider, for soldering, bonding or acrylic retention. L: 3mm, H: 2.90mm, W: 4.10mm, 2 pieces
LV HOR Mini Processing Rider HR-653-9 LV HOR Mini self-isolating processing rider. L: 3mm, H: 4.85mm, W: 3.30mm, 6 pieces
VR-133-8-A
VR-133-8-B
VR-133-8-C
LV HOR Mini White Rider 6 pieces / length: 3mm
LV HOR Mini Yellow Rider
LV HOR Mini Red Rider 6 pieces / length: 3mm
6 pieces / length: 3mm
21
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
LV OCAD
Sterngold | Overdenture Attachments – Bar
AC-173-I
LV OCAD Standard Kit OC-602-19 Kit includes: 2 bars, 6 yellow standard riders 5mm, 6 stndard processing riders 5mm, 2 standard metal housings, 1 universal insertion tool
LV OCAD Mini Kit OC-603-19 Kit Includes: 2 bars, 6 yellowmini riders 3mm, 6 mini processing riders 3mm, 2 mini housings 3mm, 1 universal insertion tool.s
Universal Insertion Tool Universal insertion tool for LV VER/LV HOR/LV OCAD females/riders
LV OCAD Bar (Standard) OC-612-1 LV OCAD burn-out plastic bar. Use a hard alloy type 4. L: 50mm, Ø: 1.80mm, H: 4mm, 4° inclination, 6 pieces
LV OCAD Standard Processing Rider OC-652-9 LV OCAD standard self-isolating processing rider. L: 5mm, H: 4.85mm, W: 3.30mm, 6 pieces
OC-653-9
LV OCAD Mini Processing Rider
LV OCAD Mini self-isolating processing rider. L: 5mm, H: 4.85mm, W: 3.30mm, 6 pieces
LV OCAD Standard Housing OC-642-3CR Housing - CR Alloy for LV OCAD standard rider, for soldering, bonding or acrylic retention. L: 5.30mm, H: 5.20mm, W: 4.10mm, 2 pieces
LV OCAD Mini Housing OC-643-3CR Housing - CR Alloy for LV OCAD mini rider, for soldering, bonding or acrylic retention. L: 3.30mm, H: 5.20mm, W: 4.10mm, 2 pieces
AC-674-P
LV OCAD Paralleling Mandrel
LV OCAD paralleling mandrel. Ø 2.35mm * can also be used for Hader Bar
22
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
LV KON
Sterngold | Overdenture Attachments – Bar
LV KON Kit for Direct Modelling KN-802-W Kit includes: 5 white, 5 opaque, 5 blue, 3 green, 3 yellow, 2 red and 2 purple
LV KON Friction Direct White KN-852-W Kit for direct modelling. 6 pieces
LV KON Kit for Silicone Duplicating KN-802-O Kit includes: 5 orange, 5 opaque, 5 blue, 3 green, 3 yellow, 2 red and 2 purple
LV KON Friction Duplicating Orange KN-852-0 6 pieces. H: 10mm, W: 3mm, T: 1mm
LV KON Friction Provider White KN-812-0 Reduced. 6 pieces. H: 10mm, W: 3mm, T: 1mm
LV KON Friction Provider Blue KN-812-1 Weak. 6 pieces. H: 10mm, W: 3.02mm, T: 1.09mm
LV KON Friction Provider Green KN-812-2 Normal. 6 pieces. H: 10mm, W: 3.02mm, T: 1.09mm
LV KON Friction Provider Yellow KN-812-3 Medium. 6 pieces. H: 10mm, W: 3.02mm, T: 1.09mm
LV KON Friction Provider Red KN-812-4 Strong. 6 pieces. H: 10mm, W: 3.02, T: 1.09m
LV KON Friction Provider Violet KN-812-5 Extra-strong. 6 pieces. H: 10mm, W: 3.04mm, T: 1.15mm
23
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
DOLDER BAR
Sterngold | Overdenture Attachments – Bar
DOLDER BAR ® • Precision bar attachment • Rigid bar unit or resilient, hinging bar joint • Gold alloy (Elitor) bar and channel • Adjustable retention • Two bar cross section designs: parallel walls for rigid unit or gingival taper for resilient joint • Small and large cross sectional sizes • 25mmand 50mm lengths Fixation Bar—soldered to retainer castings. If the retainers are porcelain–metal crowns, solder the bar after ceramic firing. Channel — polymerized into denture acrylic
Rigid Dolder Bar® and Channel
Resilient Dolder Bar® and Channel
MinimumSpace Required Definitions of Dimensions, pages 6-7 Height FCWidth FCHeight
RCWidth
Small Rigid
4.0mm†
1.6mm 1.6mm 2.2mm 2.2mm
2.3mm 2.3mm 3.0mm 3.0mm
5.5mm 5.5mm 6.5mm 6.5mm
Small Resilient 4.7mm†
Large Rigid
4.7mm†
Large Resilient 5.7mm†
†Add1.0mmfor patientswithhabitually strongbites.
RigidDolder Bar® andChannel
Small
Large
Rigid Bar only (male) 25mm length
801327 801328
n/a n/a
50mm length
Channel only (female) 25mm length
054746 052043
054747 052046
50mm length
Rigid Dolder Bar Complete 25mm
801321 801322
n/a n/a
50mm
Resilient Dolder Bar® andChannel
Small
Large
Resilient Bar Only (male) 25mm length
801330 801331
n/a n/a
50mm length
Channel only (female) 25mm length
054746 052043 801335 070171
054747 052046
50mm length
n/a
ParallelingMandrel Processing Jig, 50mm
070173
24
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
ERA®, STERN SNAP® ACKERMANN,
Sterngold | Overdenture Attachments – Bar
ERA ® BAR As with all ERA® attachments, these feature a black fabricationmale with built-in spacer and there are six colored codedmales for a consistent level of retention over the life of the attachment. Optional Micro ERA® metal jacket holds the attachment male securely in the denture base and comes preloaded with the black fabricationmale. Males are changed without the use of auto polymerizing acrylic. A new addition is the Micro ERA®- DE Weldable which can be welded off the end of a bar.
Micro ERA® Drill and Tap
Micro ERA® Bar female-weldable
M2 x 0.4mmPitchThread
811217 811218 811219 811221 811222 811607 811236 811029
Micro ERA® Bar female-weldable (Stainless Steel) Micro ERA® Bar female-weldable (Titanium) Micro ERA® female-Drill andTap (Titanium)
Micro ERA®-DE female- weldable
Bar Attachment Drill Bar Attachment Tap
Micro ERA®-DE female-weldable (Titanium) Micro ERA® Overdenture Impression Coping Micro ERA® Overdenture AssortedMales
MinimumSpace Required Height+
Bar Attachment Drill
FCWidth
FCHeight
RCWidth
+6mm
3.5mm
4.4mm
5.4mm
†Add1.0mmfor patientswithhabitually strongbites.
Bar Attachment Tap
Stern SNAP ® Bar
904812 811221 811222
Stern SNAP® Drill &Tap Bar Attachment Drill Bar Attachment Tap
Stern SNAP® Drill & Tap
M2 x 0.4mmPitchThread
ACKERMANN
Mechanical snap retention.
Fixation : • Gold rider - polymerized into denture acrylic. • Optional spacer used during processing, and then removed when vertical resiliency is desired.
"A" Clip
05050010 05050011
Ackermann-Bar A female part E Ackermann-Bar B female part E
"B" Clip
25
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
SNAP® & SNAP® ANGLED
Sterngold | Implant Overdenture Attachments
Stern SNAP® & SNAP® Angled Implant Abutments The Stern SNAP® and SNAP® Angled Overdenture Implant Abutment System is compatible with all popular implant systems. Its Innovative Two-piece design allows the SNAP® Angled to performTrue Angle Correction of up 20 degrees on divergent implants, without the need to rely on a hinging attachment. The System features a New Maximum Durability Cap, (available in 1lb, 2lb, and 3lb,) that does not require a housing, and the CM LOC® retention caps, which have a pink colored titanium housing and 4 Pekkton® inserts, (available in 1 lb., 2 lb., 4 lb., and 6 lb.). The Stern SNAP® is an Innovative, Predictable, and Economical solution for stabilizing your patients’ denture. PEKKTON® attachments are part of the CM® LOC system. CM LOC® is a registered trademark of Cendres+Métaux SA Switzerland
Visit our Stern SNAP ® Selection Guide Here Visit our Stern SNAP ® Angled Selection Guide Here
Item
Number
904130 904134 904135 904136 904129 905090 905265 905229 904962 904961 904960 904123
Stern Snap Retaining CapMetal Free, Assorted, 3 Stern Snap Retaining CapMetal Free, Yellow, 3 Stern Snap Retaining CapMetal Free, Green, 3 Stern Snap Retaining CapMetal Free, Brown, 3
Stern Snap Dentist Tool kit
Stern Snap Insertion/Removal Tool
Flat Blade Square Driver
.050" Hex Tool, Long, Tapered
Stern Snap Analog
Stern Snap Impression Coping Stern Snap Angled Alignment Post Stern Snap Angled Attachment CM LOC® Basic Set Titanium
05003082 05001328 05001314 05001315 05001316 05001317 07000205 07000217
CM LOC® Processing Insert, 4
CM LOC® Retention Inserts Extra Low, 4 CM LOC® Retention Inserts Low, 4 CM LOC® Retention Inserts Medium, 4 CM LOC® Retention Inserts Strong, 4
* Available for Straight and Angled
CM LOC® Multi Tool
CM LOC® Housing Extractor
Fixation One piece straight abutment-screwed into implant. Two piece angled abutment-angled attachment screwed into abutment base, base screwed into implant.
Stern Snap Angled Attachment
Stern Snap Retaining Cap Metal Free, Assorted
CM LOC® Basic Set Titanium
26
ATTACHMENT CATALOG
WWW.STERNGOLD.COM
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32Made with FlippingBook - professional solution for displaying marketing and sales documents online