43.HM 40.FSP 45-49
ELECTRONICS HOUR METERS
NOTES
WIRED HOUR METERS ProX offer two different wired meters. The Hour Meter, which shows the hours the engine has ran and the Hour/Tach meter that displays the engine running hours and RPM as well when the engine is running. When the engine is off the meter shows total hours accumulated. Both meters’ display can be read at all times, with engine off or on. There is no clicking like mechanical meters. Also the encapsuled epoxy case is water resistant and shock proof.
ProX Hour/Tach Meter Features :
• Works on all 2/4 stroke gasoline engines up to 2 cylinder including newer FI bikes. • Easy installation, no wiring necessary just plug and play. • Adjustable RPM input for dual or single spark ignition systems. • Real time reading of tach upto 20.000 rpm. • All flash alerts count down the last 10 hours left before service. • All flash alerts are easily reset with a touch of a button. • Meter also includes timer mode to record individual riding sessions. • Total hours accumulated is not re-settable and cannot be erased. • No power required, includes a 10 year battery sealed inside. • 100% epoxy encapsuled casing is water restistant and shock-proof.
Partnumbers
Description
43.HM001 43.HM002
Prox Hour Meter
Prox Hour/Tach Meter
Protection
FRONT FORK SEAL PROTECTORS
The ProX neoprene fork seal protector is a great and simple product to prevent blown fork seals from dirt getting stuck in the seal lips. Simply sliding down the neoprene sleeve to your fork leg, covering the seals and you're good to go. The sleeve will be kept in place with zip ties provided.
The stretchy and durable neoprene material protects the fork tube and fork seal from sand, rocks and other dirt while it does not deteriorate from fork oil.
ProX fork seal Protectors are sold in pairs and do fit various diameter of fork legs from 44 mm. up to 50 mm. Also each set is available in 2 lengths, a 360 mm length will cover the entire fork tube and a 130 mm length will cover the fork seal and short part of the fork tube. The full length 360 mm. can be used for bikes using open type fork leg guards and the shorter 130 mm. type can be used for most bikes using closed type fork leg guards.
ProX Racing Parts neoprene fork seal protector features :
- Ultimate protection against sand, rocks or dirt - Available in different length for optimal fit - Simple and easy fit - Sold in pairs including zip ties
Partnumbers
Description
40.FSP1304450 40.FSP3604450
ProX Neoprene Forkseal Protector 130 x 44-50 mm. ProX Neoprene Forkseal Protector 360 x 44-50 mm.
558
PRO-X.COM
Made with FlippingBook - Online catalogs