Software
Easy programming – step by step
03 configuration block settings
The programming software xLogicSoft allows easy and transparent programming of the MicroPLC with a PC. Up to 1024 (64 for PR-6 and PR-12 Economy; 512 for PR-12 and PR-14 Series) function blocks can be stored inside the program memory of the Micro PLC. Stored programs cannot be lost even during a power loss. Therefore back up batteries are not needed. With the simulation tool, the set up can be tested on the PC before commissioning. Control tasks can be solved easily with the function blocks available in the library (over 70 different instructions). Programming codes in a high-level program language are not required. Simply place the corresponding function blocks and link them with other function blocks according to the required control function.
04 Connection blocks with lines
05 Simulating
Download Now! Download the FREE xLogicSoft software and a number of complete programs for applications from our website – rievtech.com/download
21
Made with FlippingBook - Online magazine maker