Software Easy configuration – xLogicSoft
En, Validation - This input enables a block function. When this input is “0”, other signalsto the block will be ignored. Trg - This input is used to trigger the start of a function Block Input Types R - Reset. The reset input R takes priority over all other inputs and resets the outputs. Set - A signal at input S sets the output to logical “1” Fre - Frequency signals to be evaluated are applied to this input. Forward - The input is used to control cam progress.
Special Blocks
Constant Blocks
Special Blocks
Special Blocks
Miscellaneous
Timers
Analog
Digital
Memory Write
On-Delay
Digital Input
Analog Watchdog
Analog Differential Trigger
Off-Delay
Cursor Key
Memory Read
Word to Bit
On-/Off-Delay
Shift Register Bit
Analog MUX
Retentivite On-Delay
Bit to Word
PI Controller
Status 0 (Low)
Wiping Relay (Pulse Output)
Device Reset
Analog Ramp
Status 1 (High)
Edge Triggered Wipining Relay
Comport Status
Digital Output
Analog Math
Value - The input, whose type is Integer. Reverse - The input is used to control backward CAM movement.
Asynchronous Pulse Generator
Application Blocks
Open Connector
Long Datas Math
Random Generator
CAM Control
Analog Math Error Detection
Modbus Addresses DI C DO M DF REG AI 1x 0-143 BIT R 256-259 BIT R 0-137 BIT R/W 256-1279 BIT R 1536-1791 BIT R/W 0~1023 LONG R/W 1024-1159 SHORT R 1x 0x 0x 0x 4x 4x
Digital Flag
Angular CAM Timer
Strairway Lighting Switch
Panel Key
Analog Filter
Pumps Management
Analog
Multiple Function Switch
Max/Min
Analog Input
Defrost
Weekly Timer
Average Value
AO AM AF HEG
4x
1280-1313 SHORT R/W
Analog Output
4x
1536-2559 SHORT R
Comparison of 2 Values
Miscellaneous
Yearly Timer
3072-3327 SHORT R/W
4x
4x
2560-3071 WORD R
Latching Relay
Analog Flag
Astronomical Clock
R - Only Read R/W - Read and Write
Multicompare
Pulse Relay
Basic Blocks
Compare in Zone
Stopwatch
Message Text
AND
Counters
Conversion Word Bits
Up/Down Counter
SoftKey
AND (Edge)
Conversion Bits Word
Hours Counter
Shift Register
NAND
Demultiplexer
Threshold Trigger
PWM
NAND (Edge)
Multiplexing
Analog
Modbus Read
OR
Multiplexer
Analog Comparator
Modbus Write
NOR
Square Root
Analog Threshold Trigger
RH Math
XOR
Sin/Cos
Analog Ampli er
Data Latching Relay
NOT
Absolute Humidity
Long Data Latching Relay
Boolean Function
24
Made with FlippingBook - Online magazine maker