MT-30 Webasto’s MT-30 is ideal for testing smaller applications such as battery modules, fuel stacks, partial modules and smaller components. This system provides an economical solution for a variety of testing needs while occupying a small footprint in the laboratory.
All Webasto power cycling systems are equipped with a real-time clock on the system’s control board that enables measurement of Ah and kWh during cycling.
Technical Specifications
MT-30
3 Phase, 240, 380, 440 and 480 VAC
Input Voltage Options
130, 83, 71 and 66 Amps
Currency Draw
60Hz (50 Hz available)
Frequency
Internal transformer
Isolation transformer
> 99%
Power factor
< 3% THD; IEEE 519 Compliant
Harmonic distortion
Manual; Remote Operation System (ROS); DCOM Driver for LabVIEW; C++ and Visual Basic; CAN
Multiple User Interfaces
< 0.5Arms
Current Ripple - Indepdendent & parallel mode
< 15Arms
Current Ripple - Max ripple from load
0-35°C
Operating Environment - Temperature
5-90% non-condensing
Operating Environment - Humidity
1320 lbs (599 kg)
Weight
34” W x 55” H x 40” D (87cm W x 140cm H x 102cm D)
Dimensions
Operating Range Configuration
Voltage (Vdc)
Current (Adc)
Power (kW)
+5 to +120
-330 to +330
-30 to +30
Channel A
+5 to +120
-170 to +170
-20 to +20
Channel B
+5 to +120
-500 to +500
-30 to +30
Parallel
Accuracy & Resolution Measurement
Accuracy (±)
Resolution
125mV or 0.15% of the reading
20mV
Voltage
125mA or 0.25% of the reading
20mA
Current Channel A
50mA or 0.25% of the reading
20mA
Current Channel B
135mA or 0.25% of the reading
40mA
Current Parallel
19
Made with FlippingBook Online newsletter