CORRECTNESS
rear legs Hip & The hind leg and all its structural parts bear the weight of the rear portion of the sheep and are used to propel it forward when in motion. As such the weight is aligned evenly under and supporting the pelvis above. When joint angles are optimal, the joints receive minimal stress and function as designed. This allows the sheep to move freely. The images below show how the rear leg should be positioned under the pelvis. Deviations from ideal often result in shortened longevity, lameness and limited utility over the lifespan of the sheep.
BOWED REAR LEGS
STRAIGHT HOCKED
SHORT ROUND RUMP
Hocks deviate outward affecting longevity and hoof wear.
Or post legged, affects joint flexibility resulting in joint pain and reduced longevity.
Small pelvis that may relate to lambing concerns.
COW HOCKED
SICKLE HOCKED
HIGH FLANK
ANATOMY OF A FOOT
Hock joints set close behind affecting longevity and joint stress. The hocks should not rub or touch each other and should therefore be spaced adequately to allow for free unhindered movement.
Extreme hock angle putting excessive strain on the hock joint and reducing longevity.
Associated with lack of body capacity needed for high production, hoof wear and longevity.
ANATOMY OF THE HOOF
WEAK PASTERNS Causes joint pain, excessive heel wear and severely reduces longevity.
Note that for ease of viewing this foot has the toes separated. The ideal foot will have space between the bulbs of the heel and the toes will meet at the front. Open toed sheep will tend to get foreign bodies lodged between the toes causing pain and lameness.
A properly trimmed foot or one that wears naturally on a structurally correct sheep will look like this at the bottom of the foot. The heel is deep and the toes short. When trimming a foot it is the hoof wall that can grow out of shape and need reshaping.
COMPARISON OF PROPER ALIGNMENT OF THE REAR LEG AND THE USUALLY SEEN DEVIATIONS THAT SHOULD BE SELECTED AGAINST: 1. Wide, square, rear leg placement. A plumb line dropped from the pin 3. Narrow based, hocks 4. Bow legged, hocks turn outward, uneven weight distribution on the foot. 2. Hocks turned inward, stance is narrow and feet turn outward, uneven weight distribution on the foot. spaced too close together causing interference on the move.
COMPARISON OF PROPER ALIGNMENT OF THE REAR LEG AND THE USUALLY SEEN DEVIATIONS THAT SHOULD BE SELECTED AGAINST: 1. Rear leg profile
4. A weak rear pastern, dew claw is dropped, heel is shallow and toes grow long and can be swollen and painful over time.
2. Sickle hocked, weak rear leg rear leg often associated with a sloped rump and sore hocks as the leg is set under the body.
3. Post legged hock that is too straight and lacks flexibility. This puts great strain on the hock joint due to the jarring movement of the limb in motion.
correctly aligned. A plumb line dropped from the pin bone touches the front of the hock and intersects the foot in the middle. Joint angle allows for flexibility and even weight distribution.
bones to the hock intersects directly through the middle of the foot to evenly distribute weight.
1
3
2
4
1
2
3
4
IDEAL MOVEMENT: The limbs described allow for free, flexible, pain free movement that rewards with longevity and freedom from lameness. A free moving, long- strided sheep will reach forward with its front foot on the ground, as far forward as its nose on profile. It will meet the track of its front foot with its hind foot. Its top will remain level and spine will show flex and lack of stiffness. Weight will be distributed evenly on all four feet and the sheep will stand squarely on all four corners. 31
Made with FlippingBook - professional solution for displaying marketing and sales documents online