LUXE SERIES — MODIFICATIONS continued
CUSTDOOR/CUSTBF — Custom Size Door and Blank Fronts
Panel Configurations
This option gives you the ability to order custom panel sizes based on specific parameters for each door style. You must specify the following information when ordering. Does not include installation hardware. When installing custom doors, special drilling may be required for installing the hinge mounting plates on the cabinet box. Wellborn has the right to substitute MDF for center panels with paints and paints with glazes to insure better quality on larger panels. • Drill or No Drill (ND) - If Drill is selected, then you must specify Left (L) or Right (R) hinge. • Door Edge Profile (DE) or Square Edge Profile (SE) - Note: All edges will receive the specified edge treatment. • Height and Width - Sizes are allowed in 1 ⁄ 16 ” increments
8"-24"
- There are minimum and maximum widths allowed in order to retain the door profile. Minimum and maximum widths will vary based on individual door construction. • Door Type - FD Finished Door - DDF Decorative Door Frame - MD Mullion Door If DDF or MD is chosen, specify Glass Type: Codes Description
24 "- 16 / 1
48"
Price is in addition to sq. ft. door pricing Glass Max. Sizes
NG CG RG SG
No Glass Clear Glass Reeded Glass Satin Glass
No Charge $100 List $150 List $150 List $150 List $150 List $150 List $150 List $150 List
---
48" x 60" 32" x 42" 63" x 44" 24" x 72" 32" x 42" 24" x 72" 24" x 72" 30" x 72"
CSG SSG CAG CWG CBG
Clear Seedy Glass Super Seedy Glass Clear Antique Glass Clear Water Glass Clear Baroque Glass
24 1 / 16 "-48"
8"-24"
Custom Blank Front Parameters: For Custom Blank Front orders, specify:
Custom Door Parameters: For Custom Door orders, specify:
Edge Profile – DE/SE Height measurement Width measurement • Any blank fronts not listed are SLAB. • Minimum Size, Slab, H x L = 4 5 ⁄ 8 ” x 7” • Minimum Size, 5-piece, H x L = Will vary by door size • Maximum Size, H x L = 22” x 48” (except Harbour & Bridgeport) Refer to individual Door Style pages for size limitations
Door Hinge – L/R/ND Edge Pofile – DE/SE Door Type – FD/DDF/MD
Height measurement Width measurement Door Styles (Cope & Tenon) Width: • Minimum = 8”
- Bishop, Trestle, Chelsea, Marlow, Wyatt, & Collins doors less than 10 1 ⁄ 8 ” will have reduced width stiles. • Maximum = 24” (single panel), 48” (horizontal double panel) - Doors greater than 24” wide are not available over 48” high. • Maximum = 48” (single panel); 72” (vertical double panel) - Doors greater than 24” wide are not available over 48” high.
Height: • Minimum = 8”
Typical Number of Hinges by Door Height
Mitered/Slab Door Styles (all are single panel) Width: • Minimum = 8” • Maximum = 24” Height: • Minimum = 8” • Maximum = 72”
102mm
102mm
To Calculate the Price of Your Panel: The custom panels are priced per square foot. There is a minimum charge of 1 sq. ft. for blank fronts and 1 ½ sq. ft. for doors.
Pricing Per Sq. Feet
A
B
WOOD MDF EBM HTM DESIGNER LAMINATE COLORS
ITEM CODE
CUSTDOOR/CUSTBF 120 120 86
96
120
132
EXAMPLE: Panel Size
Note: All cope and tenon and MDF door styles over 48” high will have a mid-rail, and if over 24” wide will have a center stile. Mitered and slab doors will remain a one-piece panel. Bel-Air and Soho door styles in horizontal grain patterns are not available over 48” high.
36” x 30” = 1,080 ÷ 144 = 7.5 sq. ft. For Custom Door (or Blank Fronts): 7.5 sq. ft. x $120 List = $900
1–130
Made with FlippingBook Online document maker