FLUTED VANITY PILASTERS
• 3 ⁄ 4 ” Solid wood fronts • Back, top and bottom are 1 ⁄
31 1 / 2 ” High, 21” Deep
FP31V FP631V
2 ” unfinished plywood
• Sides are 1 ⁄ 2 ” finished plywood • 3” Wide has 4 flutes and 6” wide has 8 flutes • When ID/RD option is chosen, pilasters are built to the specified depth (i.e. RD16 will be 16” deep) • For MDF door styles, pilasters are painted hardwood • Available in wood and MDF only
31 1 / 2 , 34 1 / 2
34 1 / 2 ” High, 21” Deep
FP34V FP634V
7 1 / 2
21 7 / 8
3, 6
Modification APC BO FH FI FIMD FME IC ID MD MH MW P RD RTK TKA VTK LUX s s • •
PLAIN VANITY PILASTERS
• 3 ⁄ 4 ” Fronts • For wood, back, top and bottom are 3 ⁄
PP1.531V PP31V PP631V 31 1 / 2 ” High, 21” Deep 34 1 / 2 ” High, 21” Deep PP1.534V PP34V PP634V
4 ” unfinished plywood with sides that are 1 ⁄ 2 ”
finished plywood • When ID/RD option is chosen, pilasters are built to the specified depth (i.e. RD16 will be 16” deep) • For EBM, HTM or DLM, back, top and bottoms are 3 ⁄ 4 ” laminated furniture board with sides that are 3/4” laminated furniture board and edge banded along the back, top and bottom edges • Finish techniques are not included • For MDF door styles, pilasters are painted hardwood • 1 1 ⁄ 2 ” Wide pilasters are available in wood and MDF only
31 1 / 2 , 34 1 / 2
21 7 / 8
1
1 / 2 , 3, 6
Modification APC BO FH FI FIMD FME IC ID MD MH MW P RD RTK TKA VTK LUX s • •
ANGLE PLAIN VANITY PILASTER
• 3 ⁄ 4 ” Solid wood fronts • Back, top and bottom are 1 ⁄
APP31VL APP31VR 31 1 / 2 ” High, 21” Deep 34 1 / 2 ” High, 21” Deep APP34VL APP34VR
21
2 ” unfinished plywood
18
• Finished on front and short side only • When ID/RD option is chosen, pilasters are built to the specified depth (i.e. RD16 will be 16” deep) • For MDF door styles, pilasters are painted hardwood • Available in wood and MDF only
31 1 ⁄ 2 , 34 1 ⁄ 2
21
18
3 Top View
3
Modification APC BO FH FI FIMD FME IC ID MD MH MW P RD RTK TKA VTK LUX s s •
Left Shown
MATCHING VANITY END PANELS
EXTENDED MATCHING VANITY END PANELS
34 1 / 2 ” High, 21” Deep
31 1 / 2 ” High, 21” Deep
1 / 2 ” High, 21” Deep
1 / 2 ” High, 21” Deep
31
34
MVEP
MVEPBH
MVEPE
MVEPBHE
31 1 / 2 ” High, 18” Deep
34 1 / 2 ” High, 18” Deep
1 / 2 ” High, 18” Deep
1 / 2 ” High, 18” Deep
31
34
MVEP18
MVEP18BH
MVEP18E
MVEP18BHE
31 ½ 34 ½
31 ½ 34 ½
18 ⅞, 21 ⅞
18 ⅞, 21 ⅞
18, 21
18, 21
18, 21
18 ⅞, 21 ⅞
Cope and Tenon One Piece
Cope and Tenon One Piece
27, 30
27, 30
31 ½, 34 ½
31 ½, 34 ½
3 ⁄ 4 " Solid Wood Finished (4) sides
4 ½
3 ⁄ 4 " Solid Wood Finished (4) sides
4 ½
Slab One Piece
Miter Two Pieces
Miter Miter Two Pieces
Slab One Piece
• 3 ⁄ 4 ” Thick panels • Square on the top and bottom • Matching door edge profile on the sides • Miter door styles have a mitered profile and a seperate toe kick • Milan and Urban are slab • For MDF door styles, Matching End Panels are painted MDF • Codes without E will line up with the cabinet end panel • Codes with E will be extended 7 ⁄ 8 ” past the cabinet end panel
Modification APC BO FH FI FIMD FME IC ID MD MH MW P RD RTK TKA VTK LUX • • •
6–14
Made with FlippingBook Online document maker