MRN_909559_2022-23 Marine Catalog

1

Scopes of delivery

Part number 5011094 Thermo Pro 90 Kit, 12 V, Diesel, Standard Kit 5011095 Thermo Pro 90 Kit, 24 V, Diesel, Standard Kit 9041365 Thermo Pro 90 12 V, Diesel, Base Heater 9041366 Thermo Pro 90 24 V, Diesel, Base Heater 9030723 Thermo Pro 90 Chiller 12 V, Diesel 9030722 Thermo Pro 90 Chiller 24 V, Diesel

6

7

18

17

8

22

13

5

21

20

16

4

15

19

23

3

14

11a

12a

11

9

12

2

Water system For the distribution of heat in your boat you may need extra hoses, valves, expansion tank, convectors, air handlers etc. Please compose your water system individually. Fuel supply For the installation of the heater in the engine compartment the fuel supply system has to be fire-resistant according to EN ISO 7840. Please order the adequate components additionally (fuel lines, fuel supply kit, rubber hose, fuel pump protection).

Item Qty Description 1 1 Heater 12 or 24 V including coolant pump

U4840 and electronic control unit (no co- olant pump with Thermo Pro 90 Chiller)

2 1 Electronic control unit 3 1 Fuel pump DP42.4 4 1 Wiring harness (heater, 570 lg) 5 1 Wiring harness (fuel pump, 5,000 lg) 6 1 Switch with lamp 12 or 24 V (not with 9029942A and 9029943A) 7 1 Fuse holder with wiring harness 8 1 Heater bracket 9 1 T-piece + fuel hoses & hose clamps (8 x 5 x 8) 10 1 Hose Ø 5 x 1.5; 6,000 lg 11 4 Fuel hose Øi 4.5 /Øa 10.5; 50 lg 11a 2 Fuel hose Øi 8 /Øa 12; 70 lg 12 8 Hose clamp (steel; Ø 10) 12a 4 Hose clamp (steel; Ø 12) 13 1 Bent hose Øi 20 / Øa 29; 2,200 lg 14 1 Air intake silencer PAK Øi 30,5 /Øa 38; 1,160 lg 15 1 Exhaust silencer Øa 38 16 1 Flexible pipe (inoxyd.) Øi 38 /Øa 42; 1,600 lg (1 x 1,000 mm + 1 x 600 mm)

3

4

Exhaust system Depending on the installation position and length of the exhaust pipe you may need a condensation water drain and an exhaust pipe insulation additionally.

5

Control element Please order an adequate control element. For the Thermo Pro 90 Chiller no control element is needed. The heater is activated via the air-conditioning control.

17 2 Connection pipe Ø 18 x 20 18 2 Connection pipe Ø 20 x 20 19 7 Hose clamp Ø 23 … 35 20 3 Hose clamp Ø 39 … 42 21 2 Pipe clip Ø 42 22 15 Cable tie 178 lg 23 1 Exhaust through hull

6

Accessories (optional) For extension of your heater system you find comfort control elements as well as other installation and system components in the accessories section.

33

Made with FlippingBook Online newsletter