Command Line Interface
Alarm Configure an RMON alarm. Syntax:
rmon alarm <id> { ifInOctets | ifInUcastPkts | ifInNUcastPkts | ifInDiscards | ifInErrors | ifInUnknownProtos | ifOutOctets | ifOutUcastPkts | ifOutNUcastPkts | ifOutDiscards | ifOutErrors } <ifIndex> <interval> { absolute | delta } rising-threshold <rising_threshold> [ <rising_event_id> ] falling-threshold <falling_threshold> [ <falling_event_id> ] { [ rising | falling | both ] } <1-65535>: Alarm entry ID. ifInDiscards: The number of inbound packets that are discarded even the packets are normal. ifInErrors: The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. ifInNUcastPkts: The number of broadcast and multicast packets delivered to a higher-layer protocol. ifInOctets: The total number of octets received on the interface, including framing characters. ifInUcastPkts: The number of unicast packets delivered to a higher-layer protocol. ifInUnknownProtos: The number of the inbound packets that were discarded because of the unknown or unsupported protocol. ifOutDiscards: The number of outbound packets that are discarded event the packets is normal. ifOutErrors: The number of outbound packets that could not be transmitted because of errors. ifOutNUcastPkts: The number of broadcast and multicast packets that request to transmit. ifOutOctets: The number of octets transmitted out of the interface including framing characters. ifOutUcastPkts: The number of unicast packets that request to transmission.
Event Configure an RMON event. rmon event <id> [ log ] [ trap <community> ] { [ description <description> ] } <1-65535>: Event entry ID. description: Specify a description of the event. <line127>: Event description.
Confidential
User Guide: CE Services
Page 101
Made with FlippingBook interactive PDF creator