Web Interface – Configuration
4.2
System – IP
IP Configuration The IP Configuration includes IP basic settings, control IP interfaces and IP routes. The maximum number of interfaces supported is 8 and the maximum number of routes is 32.
Mode Configure whether the IP stack should act as a Host or a Router. In Host mode, IP traffic between interfaces will not be routed. In Router mode traffic is routed between all interfaces.
DNS Server This setting controls the DNS name resolution done by the switch.
There are four servers available for configuration, and the index of the server presents the preference (less index has higher priority) in doing DNS name resolution. System selects the active DNS server from configuration in turn, if the preferred server does not respond in five attempts. The following modes are supported: · From any DHCPv4 interfaces - The first DNS server offered from a DHCPv4 lease to a DHCPv4-enabled interface will be used. · No DNS server - No DNS server will be used. · Configured IPv4 - Explicitly provide the valid IPv4 unicast address of the DNS Server in dotted decimal notation. Make sure the configured DNS server could be reachable (e.g. via PING) for activating DNS service.
Confidential
User Guide: CE Services
Page 130
Made with FlippingBook interactive PDF creator