Web Interface – Configuration
On the other hand, if you want to disable existed VLAN range, then you can follow the steps.
1. press Add VLAN Range to add a new VLAN range. 2. input the VLAN range that you want to disable.
3. choose Mode to be Disabled. 4. press Save to apply the change. Then, you will see the disabled VLAN range is removed from the DHCP Server mode configuration page.
Mode Indicate the operation mode per VLAN. Possible modes are:
Enabled : Enable DHCP server per VLAN. Disabled : Disable DHCP server pre VLAN.
4.10.1.3 DHCP Server Mode Buttons
Add VLAN Range: Click to add a new VLAN range. Save: Click to save all changes. Reset:
Click to undo any changes made locally and revert to previously saved values.
4.10.2 DHCP Server Excluded IP Configuration
This page configures excluded IP addresses. DHCP server will not allocate these excluded IP addresses to DHCP client.
Confidential
User Guide: CE Services
Page 150
Made with FlippingBook interactive PDF creator