Web Interface – Configuration
4.12.2 Privilege Level
Every group has an authorization Privilege level for the following sub groups: configuration read-only, configuration/execute read-write, status/statistics read- only, status/statistics read-write (e.g. for clearing of statistics). User Privilege should be same or greater than the authorization Privilege level to have the access to that group. Notes that some web pages (for example, MPLS-TP and MEP BFD pages) are based on JSON to transmit dynamic data between the web server and application. These pages require the configuration Read/Write privilege of JSON_RPC group before any operations. This requirement must be met first, then it will evaluate the current privilege level against the required privilege level for the given method. For example, assumes the MPLS-TP page only allows Read-Only attribute under privilege level 5, the privilege configuration should be set as JSON_RPC:[5,5,5,5] and MPLS_TP:[5,10,5,10].
4.12.3 Privilege Levels Buttons Save: Click to save all changes Reset:
Click to undo any changes made locally and revert to previously saved values
Confidential
User Guide: CE Services
Page 158
Made with FlippingBook interactive PDF creator