Web Interface – Configuration
4.15 Security – Switch – HTTPS
The user can configure HTTPS from this page.
4.15.1 HTTPS Configuration
The HTTPS configuration has the following parameters:
Mode Set or show the HTTPS operation mode. This mode allows the user to disable HTTPS even when the current connection is HTTPS. Possible modes are:
Enabled: Enable HTTPS mode operation. Disabled: Disable HTTPS mode operation.
Automatic Redirect Set or show the HTTPS redirect operation mode. Automatic Redirect is only available when HTTPS mode is enabled. Enabled: Enable HTTPS redirect mode operation, to automatically redirect web browser to an HTTPS Disabled: Disable HTTPS redirect mode operation (This is the default). Notice that the browser may not allow the redirect operation due to the security consideration unless the switch certificate is trusted to the browser. You need to initialize the HTTPS connection manually for this case.
Confidential
User Guide: CE Services
Page 163
Made with FlippingBook interactive PDF creator