Web Interface – Configuration
Deny:
Forwarding is denied
Rate Limiter ID Set or show the rate limiter to apply on this port. The Rate Limiter can be Disabled or set to a value from 1 through 16. The default value is “ Disabled ” . EVC Policer Select whether EVC policer is enabled or disabled. The default value is "Disabled". Note that ACL rate limiter and EVC policer can not both be enabled. EVC Policer ID Select which EVC policer ID to apply on this port. The allowed values are Disabled or the values 1 through 256. Port Redirect Set or show which port frames are redirected on. The Port Redirect can be Disabled or set to a specific port number. It cannot be set when “ Action ” is permitted. The default value is “ Disabled ” . Mirror Set or show the mirror operation of this port: Enabled: Frames received on the port are mirrored Disabled: Frames received on the port are not mirrored The default value is “ Disabled ” . Logging Set or show the logging operation of this port: Enabled: Frames received on the port are stored in the System Log Disabled: Frames received on the port are not logged (The default value is “ Disabled ” .)
Note:
¾ The logging message does not include the 4 bytes CRC.
¾ The logging feature only works when the packet length is less than 1518(without VLAN tags) and the System Log memory size and logging rate is limited.
Shutdown Set or show the port shut down operation of this port:
Enabled: If a frame is received on the port, the port will be disabled Disabled: Port shut down is disabled (The default value is “ Disabled ” .)
Confidential
User Guide: CE Services
Page 204
Made with FlippingBook interactive PDF creator