Web Interface – Configuration
zero: IPv6 frames with a hop limit field greater than zero must not be able to match this entry non-zero: IPv6 frames with a hop limit field greater than zero must be able to match this entry Any: Any value is allowed ( “ don ’ t care ” ).
4.32.2.7
ICMPV6 Parameters The ICMPV6 parameters can be configured when the Frame Type is “ IPv6 ” and the Next Header Filter is “ ICMP ” .
ICMP Type Filter Set or show the ICMP filter for this ACE. Any:
No ICMP filter is specified (ICMP filter status is “ don ’ t care ” ) Specific: To filter a specific ICMP filter with this ACE, the user can enter a specific ICMP value. A field for entering an ICMP value appears. ICMP Type Value When “ Specific ” is selected for the ICMP Type Filter, the user can enter a specific ICMP value. The allowed range is 0 to 255. A frame that hits this ACE matches
this ICMP value. ICMP Code Filter Set or show the ICMP code filter for this ACE. Any:
No ICMP code filter is specified (ICMP code filter status is “ don ’ t care ” ). Specific: To filter a specific ICMP code filter with this ACE, the user can enter a specific ICMP code value. A field for entering an ICMP code value appears. ICMP Code Value When “ Specific ” is selected for the ICMP Code Filter, you can enter a specific ICMP Code Value. The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP code value.
4.32.2.8 TCPv6/UDPv6 Parameters
The TCPv6/UDPv6 parameters can be configured when the Frame Type is “ IPv6 ” and the Next Header Filter is “ TCP ” or “ UDP ” .
Confidential
User Guide: CE Services
Page 222
Made with FlippingBook interactive PDF creator